Full HD @ 120 fps | Color Global Shutter|AR0234CS CMOS sensor| ON Semiconductor® | USB 3.1 Gen1 e-con Systems Inc., a leading embedded camera solutions company adds yet another exciting product to its wide portfolio of industrial USB cameras by introducing the Full HD color global...

Würth Elektronik has complemented its infrared product range with the new WL-SIQW SMT Infrared QFN LED Waterclear product series. The LEDs in Quad Flat No Leads (QFN) format are available in 2720, 3535 and 3737 packages with different radiant intensities from 125 to 800 mW/sr and in...

This is a Knight Rider LED Light and it is one of the best Arduino projects for beginners. This board drives 16 high-power LEDs to turn them ON one by one sequentially. This is an open-source Arduino compatible project that contains 16 high current MOSFETs, Atmega328 microcontroller, 5V...

If you need safe power to run your project, then this circuit is a possible solution for you. This project provides protection to your system device against over-current, over-voltage, under-voltage, thermal overload, and reverse current flow control to the system device. Basically,...

The TSV791 and TSV792 are single and dual 50 MHz-bandwidth unity-gain-stable amplifiers. The rail-to-rail input stage and the slew rate of 30 V/µs make the TSV791 and TSV792 ideal for low-side current measurement. The excellent accuracy provided by maximum input voltage of 200 µV...

MPS’ MPM3860 1.2 MHz ultra-thin module can achieve 6 A of continuous output current over a wide input range with excellent load and line regulation MPM3860 from Monolithic Power Systems is a fully integrated, high-frequency, synchronous, rectified, step-down power module with an...

The new pixxiLCD graphic displays from 4D Systems are the ideal solution for easy integration. Due to the wide range of options offered by the embedded displays, developers can find the right full-color HMI for almost any application. The series is available at Rutronik UK. 4D...

The circuit in Figure 1 produces a single debounced pulse each time you press S1. Moreover, the circuit uses only logic power from the remote pull-up resistor, R2. You can use the circuit to detect when a key is pressed in a non-energized device, such as a device in a system that's...