stuee Posted August 11, 2004 Report Share Posted August 11, 2004 I have a 12v transformer for interior lights and a few lights for it, but want to make it a dimmer light. the working amps are 250mA.I would like to know how to wire up these three ways, so i can try each one and see if its any good and use the best....Touch lamp. touch the metal to turn on dimmest. press again for brighter and again for brighter and again for off.Manual pot adjuster. and digital potentimeter. press up to turn up and make brighter and down for darker / off, and a reset button to turn instant off.Any help and sche... will be helpfull.Thanks in advance Jordan&tiffany 1 Quote Link to comment Share on other sites More sharing options...
hotwaterwizard Posted August 14, 2004 Report Share Posted August 14, 2004 For the Mechanical one just go to the Junk Yard and get a Dimmer out of any car you like. for the others you can do a couple of things.Get a standard touch lamp from the store and remove the touch circuit and hook it up to the input of the transformer. or Copy the circuit with Reverse Engineering. Then hook it up to your Transformer plug side.Here are some circuits if you want to tinker.http://ourworld.compuserve.com/homepages/Bill_Bowden/page6.htm#dimmer.gifhttp://ourworld.compuserve.com/homepages/Bill_Bowden/page8.htm#touch.gif DipBappyMaymn 1 Quote Link to comment Share on other sites More sharing options...
surajbarkale Posted August 17, 2004 Report Share Posted August 17, 2004 I know this is an overkill ;D but check this IC out http://www.alldatasheet.co.kr/datasheet-pdf/pdf_kor/LSI/LS7631.html Quote Link to comment Share on other sites More sharing options...
GPG Posted August 17, 2004 Report Share Posted August 17, 2004 http://www.lsicsi.com/Easier to get here. HWW its AC. olixlosh 1 Quote Link to comment Share on other sites More sharing options...
Kevin Weddle Posted August 17, 2004 Report Share Posted August 17, 2004 What you need is to adjust the amount of AC that is applied to the lamp. You can switch power to the lamp if you want and control the duration of the switch. You just assume that there is always a mains voltage present when in fact it depends on the time. To switch the voltage you need a triac that can be biased with a variable pulse width generator. This can be a 555 timer set up to give you a variable pulse width. The variable part is under your control and I believe it is a resistor. Quote Link to comment Share on other sites More sharing options...
audioguru Posted August 18, 2004 Report Share Posted August 18, 2004 Hi Kevin,How will you syncronize your variable-pulse-width 555 circuit to the mains frequency? The posted LSI IC does it with a built-in phase-locked-loop. Quote Link to comment Share on other sites More sharing options...
trampe Posted December 17, 2004 Report Share Posted December 17, 2004 have read your problem about a dimmer for interior light.I have made a complete design about this.If you are interested, I can mail it to you (as pdf files).The design can take up to 10 lamps and you can dim one at the time.It also includes Interface til IR (Infra red).Best regards.Terje Olsen :) Quote Link to comment Share on other sites More sharing options...
audioguru Posted December 17, 2004 Report Share Posted December 17, 2004 Hi Terje,Welcome to our forum.Don't hide your fantastic design in the mail, please post it here as an attachment to your reply for all of us to see. Quote Link to comment Share on other sites More sharing options...
ante Posted December 17, 2004 Report Share Posted December 17, 2004 Hi Terje,Det ville vara interesant o se din konstruktjon! ;DPlease post the documents here, PDF files are accepted for posting. Quote Link to comment Share on other sites More sharing options...
trampe Posted December 18, 2004 Report Share Posted December 18, 2004 Well here it is.I have send 2 dimmersystem (halogenlight 1 & 2).It maybe lock rather complicated but it's not.If any question I will try to explain the circuit.I have of course the print layout but you have to tell what PCB program you are usingand I will transfer it.I also have a bigger project about dimmer but this is rather complicated with memory and Eproms ( up to 64 lamps ).Enjoy!Regards Terje Quote Link to comment Share on other sites More sharing options...
trampe Posted December 24, 2004 Report Share Posted December 24, 2004 Once again I will try to send the schematic about the dimmer circuits.Happy Christmas.Halogenlight_1.pdf Quote Link to comment Share on other sites More sharing options...
trampe Posted December 24, 2004 Report Share Posted December 24, 2004 Jippi!!!!!!!!!!!!!!!I did it. It worked.Well ! here is circuit #2Halogenlight_2.pdf Quote Link to comment Share on other sites More sharing options...
lotfi17 Posted August 4, 2005 Report Share Posted August 4, 2005 Hei TRAMPE I coud not get your email adress I need help of you concerning dimmer and infrared. Please contact me at "messenger" [email protected]. Regard Quote Link to comment Share on other sites More sharing options...
Ryan Parks Posted January 3, 2017 Report Share Posted January 3, 2017 I love it Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.