jeevan772006 Posted November 17, 2005 Report Share Posted November 17, 2005 [move] hi me jeevan i have buit an amp. and i have an problem with that my amp works properly for sometime (for 2 or 3 minute) but afterward it shut down automatically.what may be the problem of that.when input is not given then voltage on ic come to12v normal. but when input is given then the voltage drops to 7 to 9 volt.[glow=red,2,300][/glow][/move] Quote Link to comment Share on other sites More sharing options...
audioguru Posted November 17, 2005 Report Share Posted November 17, 2005 [move]The amp probably has a shorted output that is causing it to draw too much supply current, get too hot and shutdown.[/move] Quote Link to comment Share on other sites More sharing options...
jeevan772006 Posted November 18, 2005 Author Report Share Posted November 18, 2005 thanks for your suggestion but there is no short output on the amp. Quote Link to comment Share on other sites More sharing options...
jeevan772006 Posted November 18, 2005 Author Report Share Posted November 18, 2005 [move] thanks for your suggestion but there is no short output on the amp.[/move] Quote Link to comment Share on other sites More sharing options...
Shahriar Posted November 19, 2005 Report Share Posted November 19, 2005 Dear jeevan772006 Once I had made a distributor Amplifier with NE5532 IC. I had the same problem, after a few hours I found that I had not Place one of Jumpers which was related to -Vee Rail. So All of ICs didn't have a -Vee. As soon as I connected it everything went right!!! I was really surprised How it was working... ???I don't know Wether your circuit has any -Vee or not, I just told this to remember Sometimes strange things happen... ;DHTH - Shahriar Quote Link to comment Share on other sites More sharing options...
jeevan772006 Posted November 21, 2005 Author Report Share Posted November 21, 2005 [glow=red,2,300]Hi i got the solution of my problem .My transformer was faulty thats why this was happening[/glow].[glow=red,2,300][/glow] Quote Link to comment Share on other sites More sharing options...
audioguru Posted November 21, 2005 Report Share Posted November 21, 2005 Good, you fixed it! ;D Quote Link to comment Share on other sites More sharing options...
prateeksikka Posted November 23, 2005 Report Share Posted November 23, 2005 alls wel that ends well ;D ;D ;D Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.