<< home 0 next page >>    .: Build your own Lab power supply     Build a high quality power supply with a continuously variable stabilized output adjustable at any value between 0 and 30VDC. The circuit incorporates an electronic output current limiter that effectively controls the output current from a few milliamperes (2 mA) to the maximum output of 3A that the circuit can deliver.   This feature makes this power supply indispensable in the experimenters laboratory as it is possible to limit the current to the typical maximum that a circuit under test may require, and power it up then, without any fear that it may be damaged if something goes wrong. There is also a visual indication that the current limiter is in operation so that you can see at a glance that your circuit is exceeding or not its preset limits. more    .: Breadboard header for ATTiny 25/45/85       This handy breadboard header for ATTiny 25/45/85 microcontroller is a new design based on the original idea from Tinkerlog. Maybe the most useful feature is that it can provide power to the vertical breadboard strips while connecting all six port pins to the horizontal strips. more    .: iButton electronic lock       In this project we will use iButton as a key to an electronic lock. This electronic lock can use many different kinds of iButtons and can store up to 9 different keys. One of the keys is the master key and is permanent stored in memory. With the use of master key we can add or remove slave keys. more in greek   more in english  .: Tiny audio amplifier using LM386       The Tiny Audio Amplifier is a good choice for battery operation audio amplifier.  It is based on LM386 IC. Power supply - 6 - 12 VDC, Output power - 1 W, 8 Ohm, The quiescent power drain is only 24 mW when operating from 6 VDC, Self-centering output quiescent voltage, Onboard PRESET to adjust volume  more  .: Voltmeter + Ammeter LCD panel        This multimeter panel was designed to measure output voltage and current in a PSU. It needs only one supply voltage that can be acquired from main PSU. An additional function of the multimeter is that it can control (switch on and off) an electric fan. more   << home 0 next page >>

Electronics-lab.com - 2002-2013
Any logo, trademark and project represented here are property of their owner