Simple Servo Tester

schematic

Description

This is a simple servo tester which will comprehensively test the capabilities of almost any modern servo. It has two pushbuttons, CENTRE and SWEEP and a potentiometer which works as follows:

  • CENTRE Does exactly that, centers the servo, afterwards the potentiometer determines position.
  • SWEEP Sweeps the servo back and forth at a rate determined by the potentiometer setting.

The PIC uses its internal timer to set up a constant frame duration of 20ms and the on/off ratio is set by the user.

Parts

R1 = 1K
R2 = 10K
R3 = 82R
R4 = 10K
R5 = 5K potentiometer

C1 = 27pF
C2 = 27pF
C3 = 100nF

D1 = 4,7V zener diode
Q1 = 10MHz crytal
IC1 = PIC12F675

Panel

Svotstlbl2

Please follow and like us:
Pin Share



Subscribe
Notify of
guest

2 Comments
Inline Feedbacks
View all comments
Szabi

Hi there! Where can I find the HEX file? Thanks!

ElectronicsLab

For this project the source code is provided (assembly language) and you have to compile it using MPLAB IDE to a .hex file

RELATED PROJECTS

TOP PCB Companies