Year: 2016

Since Raspberry Pi doesn’t have a built-in ADC (Analog to Digital converter) to read the voltage off from most of sensors, the best solution is to add I2C ADC chips and modules to your project. Paweł Spychalski faced this problem while building his own weather station that is based...

fasoft @ elektormagazine.com has a new project proposal about a SD Card Sound Player. Searching for a powerful gong or acoustic notifier? The "Card Sound" consists of audio amplifier TDA7266 having 2x 7 W output, the AD converter CS4344, one STM32F401 and a slot for micro sd card....

PrzemekM1@ instructables.com build a simple ESP01 development board. I hate to connect ESP01 modules on breadboard so I've made simple devboard with programmer, some LEDs and switches on board. Now I can easy test some IoT projects :) Simple ESP-01 testboard -...

The LTC5596 is a high frequency, wideband and high dynamic range RMS power detector that provides accurate, true power measurement of RF and microwave signals independent of modulation and waveforms. The LTC5596 responds in an easy to use log-linear 29mV/dB scale to signal levels from...

B.Avinash and J.Karthikeyan had developed a robotic arm that mimic their moves using a Kinect sensor with MATLAB Simulink and an Arduino. The arm was built based on servo motors that replicate the right arm shoulder, elbow and hand movements. The Kinect sensor is a horizontal bar of...

Silicon technology has made tremendous progress towards ever higher device cut-off frequencies. Nowadays all RF components for mm-Wave sensing applications up to 120 GHz can be realized. Silicon Radar is a german company that designs and delivers Millimetre Wave Integrated Circuits...

The DueProLogic is a complete FPGA Development System designed to easily get the user started learning and creating projects. The DueProLogic makes programmable logic easy with an all inclusive development platform. It includes an Altera Cyclone IV FPGA, on board programming, four...

In this tutorial, I have described how to use a 16x32 RGB matrix panel with Arduino Uno for colorful display of environmental data captured locally using Bosch BME280 sensor. BME280 is a fully integrated environmental unit from Bosch that combines sensors for pressure, humidity, and...