Month: March 2018
![Isolated Power Supply for RS485, RS422, RS232, SPI, I2C and Power LAN Isolated Power Supply for RS485, RS422, RS232, SPI, I2C and Power LAN](https://www.electronics-lab.com/wp-content/uploads/2018/03/IMG_0801.jpg)
Isolated Power Supply for RS485, RS422, RS232, SPI, I2C and Power LAN
Mini Isolated Power Supply is designed for CAN, RS-485, RS-422, RS-232, SPI, I2C, Low-Power LAN applications. The power supply provides +/- 5.50 V DC symmetrical outputs with load current 500mA from 5V DC input. The project is built using SN6505A IC from Texas instruments. The SN6505A...
Continue Reading![18 Most Helpful Raspberry Pi Tutorials 18 Most Helpful Raspberry Pi Tutorials](https://www.electronics-lab.com/wp-content/uploads/2018/03/raspberry-pi-amazon-echo-1024x487.jpg)
18 Most Helpful Raspberry Pi Tutorials
After having grazed the maker's ecosystem in the year 2012, the Raspberry Pi has attracted a huge number of hobbyists and tinkerers all over the world. It has been the world's most popular single board computer and a close competitor to the Arduino since then. If you have never heard...
Continue Reading![Trill – an open-source 3G mobile phone Trill – an open-source 3G mobile phone](https://www.electronics-lab.com/wp-content/uploads/2018/03/IMG_0980-768x1024.jpg)
Trill – an open-source 3G mobile phone
This is a complete GSM/3G mobile phone, based on the ioNode. Features 128 x 64 OLED display * 16 buttons + 5-way mini-joystick * Microphone & earpiece * MicroSD card slot * MicroSIM card slot * MP3 decoder, headphone amplifier and 3.5mm stereo jack * Vibrator Trill - an...
Continue Reading![SMARC module for Industrial Ethernet SMARC module for Industrial Ethernet](https://www.electronics-lab.com/wp-content/uploads/2018/03/2018-02-26-eenews-jh-smarc.jpg)
SMARC module for Industrial Ethernet
eCOUNT embedded's ES-1XXX is the company's first Computer-on-Module family to support the SMARC 2.0 standard from the SGET. The modules are equipped with ARM Cortex-A9 based Intel Cyclone V SoCs (formerly Altera), which integrate a configurable FPGA. By integrating the...
Continue Reading![Arduino controlled Dual Mono AK4490 DAC (part 3) Arduino controlled Dual Mono AK4490 DAC (part 3)](https://www.electronics-lab.com/wp-content/uploads/2018/03/Arduino-controlled-Dual-Mono-AK4490-DAC.png)
Arduino controlled Dual Mono AK4490 DAC (part 3)
Here’s the part 3 of Dimitris’ Arduino controlled Dual Mono AK4490 DAC project. If you missed part 1 and part 2, check them out. Following up on Part 2, it’s time to talk about the output stage. This output stage is the brainchild of my friend Kostas, all I did was lay out the...
Continue Reading![Firefly – an annoying little thing Firefly – an annoying little thing](https://www.electronics-lab.com/wp-content/uploads/2018/03/firefly-1024x768.jpg)
Firefly – an annoying little thing
Here's a tiny pcb that produces an annoying sound using a piezo buzzer and a ATtiny13 microcontroller. It uses an LED, piezo buzzer, ATTINY13 Atmel microcontroller, a very small amount of Arduino code, and a coin cell battery that should last about a week. Battery life could be...
Continue Reading![EAGLE 8.7 – Parametric 2D & 3D model generation, library.io, more! EAGLE 8.7 – Parametric 2D & 3D model generation, library.io, more!](https://www.electronics-lab.com/wp-content/uploads/2018/03/medium.png)
EAGLE 8.7 – Parametric 2D & 3D model generation, library.io, more!
Today we’re proud to announce the release of EAGLE 8.7 and what is quite possibly one of the biggest releases we’ve had to-date, this time focused (largely) on libraries and library development (and what that means for 3D modeling of your finished PCB)! But before we get into it,...
Continue Reading![InnoComm NXP i.MX8M System on Module – An Advanced Video Processing SoM with Connectivity InnoComm NXP i.MX8M System on Module – An Advanced Video Processing SoM with Connectivity](https://www.electronics-lab.com/wp-content/uploads/2018/03/InnoComm-i.MX8M-Development-Kit.jpg)
InnoComm NXP i.MX8M System on Module – An Advanced Video Processing SoM with Connectivity
Last year (2017), NXP announced its new applications processors, the i.MX 8 series. The i.MX 8M family of applications processors based on Arm® Cortex®-A53 and Cortex-M4 cores provide industry-leading audio, voice and video processing for applications that scale from consumer home...
Continue Reading