Year: 2020
![Tigard Is Here to Bust Open Any Embedded Physical Interface You Can Find Tigard Is Here to Bust Open Any Embedded Physical Interface You Can Find](https://www.electronics-lab.com/wp-content/uploads/2020/11/tigard-usbc-edited_png_project-body.jpg)
Tigard Is Here to Bust Open Any Embedded Physical Interface You Can Find
We have all been there. You get a new development board, you go online to check how you communicate with it and then you realize you need a new connector that costs some extra cash. And here goes on the cycle of electronic waste, because it generally only works with boards from that...
Continue Reading![Turing Pi 2 mini-ITX case houses a Compute Module 4 from Raspberry Pi Turing Pi 2 mini-ITX case houses a Compute Module 4 from Raspberry Pi](https://www.electronics-lab.com/wp-content/uploads/2020/11/LN3fv7yWPW3NameD8KoUo8-970-80.png)
Turing Pi 2 mini-ITX case houses a Compute Module 4 from Raspberry Pi
Are you on the market for a beefy, general use or cluster computer, but do not want to break the bank or have a giant, power-hungry machine in your office? You might be thinking "nah, too many compromises, no way this is going to work". Then think again, because you should never...
Continue Reading![Lantronix Launches Open-Q™ 610 μSOM and Open-Q 610 Development Kit Lantronix Launches Open-Q™ 610 μSOM and Open-Q 610 Development Kit](https://www.electronics-lab.com/wp-content/uploads/2020/11/Screenshot_2020-11-02-Open-Q™-610-Micro-SOM-based-on-the-Qualcomm®-QCS610-Lantronix-e1604504449161.jpg)
Lantronix Launches Open-Q™ 610 μSOM and Open-Q 610 Development Kit
Lantronix had announced its new Lantronix Open-Q™ 610 μSOM based on the powerful Qualcomm® QCS610 System on Chip (SOC). This micro System on Module (µSOM) is designed for connected visual intelligence applications with high-resolution camera capabilities, on-device...
Continue Reading![Brushed DC Motor Speed and Direction Controller Using Joystick Brushed DC Motor Speed and Direction Controller Using Joystick](https://www.electronics-lab.com/wp-content/uploads/2020/11/004-e1604493366343.jpg)
Brushed DC Motor Speed and Direction Controller Using Joystick
This DC Motor controller provides direction and speed control of a brushed DC motor using a Joystick. This is an Arduino compatible open-source hardware with various applications. It can be used to control scissor lift motor, Linear actuator, Camera slider, camera pan-tilt head, curtain...
Continue Reading![DT-BL10 – Low-Power IoT Development Board Powered by RISC-V Core DT-BL10 – Low-Power IoT Development Board Powered by RISC-V Core](https://www.electronics-lab.com/wp-content/uploads/2020/10/DT-BL10-BL602-Development-Board.jpg)
DT-BL10 – Low-Power IoT Development Board Powered by RISC-V Core
DT-BL10 is a development board powered by BL602 WiSoC that sells for around $5. This board is specifically designed to work with a 32-bit RISC-V CPU with dynamic frequency from 1MHz to 192MHz. It has a 276KB SRAM and 128KB ROM. The main focus of this board is on its wide range of...
Continue Reading![PineCube Camera Dev Kit Powered by 5MP Omnivison OV5640 PineCube Camera Dev Kit Powered by 5MP Omnivison OV5640](https://www.electronics-lab.com/wp-content/uploads/2020/10/PineCube-Devkit-2.jpg)
PineCube Camera Dev Kit Powered by 5MP Omnivison OV5640
Pine64 announced its open-spec PineCube back in 2019 as a device called The Cube equipped with the 8-megapixel Sony iMX179 CMOS sensor. But for the technical issues with the Sony sensor, they changed it into a 5MP OmniVision OV5640 sensor and implemented the new name PineCube. The camera...
Continue Reading![Selpic Star A- The World’s Most Cost-Effective 3D Printer Hits Kickstarter for Only $99 Selpic Star A- The World’s Most Cost-Effective 3D Printer Hits Kickstarter for Only $99](https://www.electronics-lab.com/wp-content/uploads/2020/10/Selpic_Star_A_3D_Printer_selpic-1024x696.jpg)
Selpic Star A- The World’s Most Cost-Effective 3D Printer Hits Kickstarter for Only $99
Selpic Inc, a leading company focusing on digital printing solutions, has been developing innovative printing technologies since its foundation. Following the debut of Selpic P1, Selpic is going to launch the world’s most cost-effective 3D printer Star A on Kickstarter soon. Star A...
Continue Reading![Koki’o Project Case Goes Live On Crowdsupply Koki’o Project Case Goes Live On Crowdsupply](https://www.electronics-lab.com/wp-content/uploads/2020/11/Screenshot_2020-11-02-Kokio-Project-Case1-1024x238.jpg)
Koki’o Project Case Goes Live On Crowdsupply
Cowfish Studio has announced the launch of the Koki’o Project Case on Crowdsupply. The Koki’o project case is an open frame design that allows for panoramic viewing of your PCB while protecting the board from harmful contact with hands or tools. The open design also allows entry of...
Continue Reading