How to prevent mistakes that delay your PCB assembly (and could cost you)
PCB

How to prevent mistakes that delay your PCB assembly (and could cost you)

Many designers can’t get their board fast enough after sending their PCB design files to their PCB assembly vendors. But the surprising thing is some customers do not provide sufficient and necessary information to their contract manufacturers (CM) – causing problems, delays,...

Continue Reading
2.246
Views
0 Comments
Joy-IT PSG9080 DDS Function Generator – Programmable Signal generator
Test Equipment

Joy-IT PSG9080 DDS Function Generator – Programmable Signal generator

The programmable Signalgenerator PSG9080 can output many different waveforms like f. i. sine, square, triangle, pulse wave, and arbitrary waveforms. It has a generous frequency range from 1nHz to 80 MHz and a sampling rate of 33 MSa/s. The housing is made high-quality workmanship and...

Continue Reading
2.767
Views
0 Comments
High-contrast CoG OLED display from Raystar Optronics at Rutronik
LCD/OLED/ePaper

High-contrast CoG OLED display from Raystar Optronics at Rutronik

Ideal for wearables: With the REX128128B, Raystar Optronics offers a 128×128-pixel CoG Circular OLED display as an interesting alternative to TFT or LCD, among others. The round 1.18“ POLED is particularly thin at 2.05 mm and impresses with excellent viewing angle properties and a...

Continue Reading
2.375
Views
0 Comments
3 Phase Isolated Hall-effect Current Sense Amplifier with +/-600V Working Voltage and +/-46A Measurement Range
Test/Measurements

3 Phase Isolated Hall-effect Current Sense Amplifier with +/-600V Working Voltage and +/-46A Measurement Range

The project described here is a 3-Phase isolated Hall-effect current sense amplifier with +/-600-V working voltage range. The current sensor senses magnetic flux generated from current passing through the lead frame at common-mode voltages 0 to 600V DC and provides proportional output...

Continue Reading
2.307
Views
0 Comments
Multiphase Oscillator with 40% Spread Spectrum Frequency Modulation and 250Khz Output Frequency
TimerTop Stories

Multiphase Oscillator with 40% Spread Spectrum Frequency Modulation and 250Khz Output Frequency

This is a precision, low power, and easy-to-use oscillator that provides multiphase outputs. The output frequency of the project is set to 250Khz, with 40% spread spectrum. The oscillator frequency can be set by resistor R1, and the spread spectrum can be changed using R3. The master...

Continue Reading
1.969
Views
0 Comments
Chroma 63000 – Benchtop DC Electronic Load
Test Equipment

Chroma 63000 – Benchtop DC Electronic Load

The 63000 series programmable DC electronic loads are reliable, precision instruments primarily designed to test switching power supplies, A/D power supplies, power electronic components, adapters, 3C batteries and chargers. Its maximum 350W rated power makes it suitable for testing...

Continue Reading
2.070
Views
0 Comments
Portwell Releases a Small and Compact Fanless Embedded System with 8th Generation Intel® Core™ Processor
SBC

Portwell Releases a Small and Compact Fanless Embedded System with 8th Generation Intel® Core™ Processor

WEBS-21G0 Is Rugged, Compact, Fan-less and Ideal for Digital Signage, Medical Equipment, IoT Edge, Communication and Industrial Automation and Control Applications American Portwell Technology, Inc., a world-leading innovator for Industrial PC (IPC) and embedded computing solutions,...

Continue Reading
1.785
Views
0 Comments
Piezo contact microphone picks up voice through bone
Sensor

Piezo contact microphone picks up voice through bone

Vesper of Massachusetts is claiming high fidelity for a MEMs piezo microphone that picks up the vibration of the user’s voice through the skull. Inside are the mems, an amplifier, and a power regulator. Called VA1200, the company describes it as “the world’s first analogue...

Continue Reading
2.096
Views
0 Comments
Get new posts by email:
Get new posts by email:

Join 97,426 other subscribers

Archives