SeeedStudio’s LoRa-E5 Mini Development Board For Long Range Transmission With LoRa Support
IoT

SeeedStudio’s LoRa-E5 Mini Development Board For Long Range Transmission With LoRa Support

Lately, we have seen several development boards that support LoRa, a low-power wide-area network modulation technique. You may have seen the latest release Arduino Potenta Vision Shield - LoRa that was built on the multicore 32-bit ARM Cortex processor. With these new developments,...

Continue Reading
2.968
Views
0 Comments
DJ6 Laser Engraver is ready to outperform other devices for it’s low cost
Laser

DJ6 Laser Engraver is ready to outperform other devices for it’s low cost

Back in time, we have seen several tiny laser engravers powered by ESP32 or even Arduino. However, with the new technological advancements, more laser devices see the light, and today we have a China-based manufacturer specializing in the development of laser engraving equipment to...

Continue Reading
3.767
Views
0 Comments
e-con Systems launches High Speed Full HD Color Global Shutter USB 3.1 Gen1 Camera
Products

e-con Systems launches High Speed Full HD Color Global Shutter USB 3.1 Gen1 Camera

Full HD @ 120 fps | Color Global Shutter|AR0234CS CMOS sensor| ON Semiconductor® | USB 3.1 Gen1 e-con Systems Inc., a leading embedded camera solutions company adds yet another exciting product to its wide portfolio of industrial USB cameras by introducing the Full HD color global...

Continue Reading
2.499
Views
0 Comments
WL-SIQW high efficiency infrared light source
Led

WL-SIQW high efficiency infrared light source

Würth Elektronik has complemented its infrared product range with the new WL-SIQW SMT Infrared QFN LED Waterclear product series. The LEDs in Quad Flat No Leads (QFN) format are available in 2720, 3535 and 3737 packages with different radiant intensities from 125 to 800 mW/sr and in...

Continue Reading
1.883
Views
0 Comments
16 High Power LEDs Knight Rider Light – Arduino Compatible
ArduinoLed

16 High Power LEDs Knight Rider Light – Arduino Compatible

This is a Knight Rider LED Light and it is one of the best Arduino projects for beginners. This board drives 16 high-power LEDs to turn them ON one by one sequentially. This is an open-source Arduino compatible project that contains 16 high current MOSFETs, Atmega328 microcontroller, 5V...

Continue Reading
2.286
Views
1 Comments
High Accuracy Adjustable Overvoltage and Overcurrent Protectors using MAX17561
PowerTop Stories

High Accuracy Adjustable Overvoltage and Overcurrent Protectors using MAX17561

If you need safe power to run your project, then this circuit is a possible solution for you. This project provides protection to your system device against over-current, over-voltage, under-voltage, thermal overload, and reverse current flow control to the system device. Basically,...

Continue Reading
1.940
Views
0 Comments
TSV792 – High bandwidth (50MHz) Low offset (200µV) Rail-to-rail 5V Op amp
IC

TSV792 – High bandwidth (50MHz) Low offset (200µV) Rail-to-rail 5V Op amp

The TSV791 and TSV792 are single and dual 50 MHz-bandwidth unity-gain-stable amplifiers. The rail-to-rail input stage and the slew rate of 30 V/µs make the TSV791 and TSV792 ideal for low-side current measurement. The excellent accuracy provided by maximum input voltage of 200 µV...

Continue Reading
1.883
Views
0 Comments
MPM3860 Step-Down Power Module can achieve 6 A of continuous output
IC

MPM3860 Step-Down Power Module can achieve 6 A of continuous output

MPS’ MPM3860 1.2 MHz ultra-thin module can achieve 6 A of continuous output current over a wide input range with excellent load and line regulation MPM3860 from Monolithic Power Systems is a fully integrated, high-frequency, synchronous, rectified, step-down power module with an...

Continue Reading
1.962
Views
0 Comments
Get new posts by email:
Get new posts by email:

Join 97,426 other subscribers

Archives