login
This is a high voltage regulator project that provides 5V regulated output with a load capacity of 50mA from input supply 10V to 60V. The project is based on the ZXTR1005K4 regulator which is fully integrated into a TO252 package. We have tested this project with 60V DC input, but the project can take higher voltage input up to 100V, please refer to the datasheet below for more info, and don’t forget to change the capacitor C1 with a higher voltage rating.
60V Input – 5V @ 50mA Output High Voltage Fixed Output Regulator – [Link]
Please follow and like us:
RELATED POSTS
1 May, 2020 Advantech Releases High-Performance 3.5” SBC MIO-5373 with 8th Gen. Intel® Core™ Processors
21 April, 2020 Renesas RX66N and RX72N MCU families
2 March, 2022 Meet the COMGO Z1 – A Powerful, Top of the Line, Low-Cost Laser Engraver Review
12 June, 2017 Open-V, The Open Source RISC-V 32bit Microcontroller
1 May, 2019 Read the Design Engineer’s Guide to Pressure Sensors from Avnet
17 April, 2018 Color Detector Using TCS230 Color sensor and Arduino
Subscribe
Login
0 Comments
