login
65V Input -12Vdc Output 1A synchronous buck DC/DC converter using LM5164
This is a step-down DC-DC converter mainly designed for applications such as high-cell-count battery packs, power tools, garden tools, and electric scooters, drones. Some of the features of the project is precision enable, input voltage UVLO, internal soft-start etc. The project operates over a wide input voltage range of 15V to 65V to provide a regulated 12V-1A output at 300Khz working frequency. D1 is the power LED, and 4 Pin male header connectors provided for input and output. The full-load efficiency of the project is 90% @ nominal input voltage of 48 V and an output voltage of 12 V. The switching frequency is set by resistor R4 at 300 kHz. The output voltage soft-start time is 3 msec.
65V Input -12Vdc Output 1A synchronous buck DC/DC converter using LM5164 – [Link]
RELATED POSTS
15 February, 2022 DFRobot 0.96″ 160×80 Color SPI TFT Display
25 October, 2022 New Icarus SoM Development Kit Features a Nordic nRF9160 System-in-package
3 October, 2022 E-Ink Digital Paper Tablet Solution for is ready for Business
19 July, 2021 VoltLog’s CanLite is an ESP32-based CAN Bus Development Board
19 October, 2020 Khadas VIM1 Board Features Amlogic S905X Quad Core ARM
11 May, 2018 WellPCB – A Low Cost PCB Prototyping and PCB Assembly Service
i would like to build one of these using EasyEDA preferably to output 7.5v to 8v rather than 12v and power from 7 Nissan leaf modules that output about 55v nominal
i don’t see any schematic or board or well anything about the board i can see in the photo above on this page?
am i missing something here?
This is actually located here: https://www.electronics-lab.com/project/65v-input-12vdc-output-1a-synchronous-buck-dc-dc-converter-using-lm5164/