login
This is a minimal and small clock based on PIC16F628A microcontroller and DS1307 RTC IC. It is able to only show the time on a small 7-segment display with a total of 4 segments. The display we used is a 0.28″ SR440281N RED common cathode display bought from LCSC.com, but you can use other displays as well such as the 0.56″ Kingbright CC56-21SRWA. This project is heavily inspired by the “Simple Digital Clock with PIC16F628A and DS1307” in the case of schematic and we also used the same .hex as”Christo”.
7-segment Mini Clock using PIC16F628A and DS1307 RTC – [Link]
Please follow and like us:
RELATED POSTS
3 March, 2023 Qualcomm Aware platform combines edge computing and cloud technologies for IoT solutions
14 October, 2024 Phyx LANA TNY is A Low-Cost CH32V203 RISC-V Development Board with SMD Pin Expansion
18 October, 2021 Balanced Line Receiver for Digital Signal Over Twisted Pair CAT-5 Cable
1 September, 2017 Water Splitting With Solar Energy
12 December, 2016 30 Minutes HIV Detection Using USB Stick
26 October, 2017 Rigol general-purpose 200MHz scopes from under €600
Subscribe
Login
0 Comments
