Search Results for : display

DFI has recently announced the RPS101/RPS103 series thin Mini-ITX motherboards designed for 12th, 13th, and 14th Gen Intel Gen CPUs that support up to 64GB of DDR5 memory. Supported by Intel 700 series UHD Graphics, it is capable of delivering 4K high-resolution quad display outputs,...

Waveshare has recently launched the ESP32-S3-AMOLED-1.91-M dev board which is an ESP32-S3-based board with a 1.91″ AMOLED display, designed for rapid prototyping and IoT or portable projects Powered by the ESP32-S3R8 chip, it includes a 32-bit LX7 dual-core processor (up to 240MHz),...

The X7433RE-IM-A 3.5-inch industrial SBC is designed for use in embedded systems and IoT edge devices. It features an Intel Atom X7433RE quad-core processor with integrated Intel UHD Graphics, supporting up to 16GB of DDR5 RAM and three 4K displays via HDMI, DisplayPort, and LVDS/eDP...

This project is an inclinometer based on the ADXL203/ADXL103 accelerometer chip and the Arduino microcontroller ATMEGA328. The device measures tilt and displays it on a 17-segment bar graph display. The ADXL203 provides an analog value, which is read by the ATMEGA328's ADC A0 and...

This project enables the measurement of fuel levels in a tank using a resistive float sensor. The fuel level is measured and displayed on an OLED display. The project is compatible with Arduino and features an ATMEGA328 microcontroller. The resistive sensor, connected to a divider...

Jetway has recently announced the JPIC-ADN1 Pico-ITX SBC, equipped with Intel N-series processors, such as the Intel Processor N97 or N200, designed for low-power, high-efficiency applications. It supports up to 32GB of DDR5 memory, features onboard Intel UHD Graphics, and provides dual...

Lilygo has recently launched the T-Embed, an IoT-embedded panel designed for programmable development, featuring a compact design with ABS and PC material. The ESP32-S3 MCU powers it and supports Wi-Fi and Bluetooth 5, including Bluetooth mesh. The panel includes a 1.9-inch IPS color...

Lilygo has recently launched the T-Embed CC1101, a transceiver module that integrates an ESP32-S3 dual-core LX7 microprocessor and a built-in Sub-GHz module based on the CC1101 chip, designed for communication in the 300-348 MHz, 387-464 MHz, and 779-928 MHz frequency bands. It features...