Author: mixos
![TQ product launch of CPU modules based on NXP’s i.MX 8X ARM® Cortex®-A35 TQ product launch of CPU modules based on NXP’s i.MX 8X ARM® Cortex®-A35](https://www.electronics-lab.com/wp-content/uploads/2020/05/tqma8xxs-1024x576.jpg)
TQ product launch of CPU modules based on NXP’s i.MX 8X ARM® Cortex®-A35
With the official launch of the i.MX8 X Arm® Cortex®-A35 CPUs from NXP on May 14, 2020, the technology company TQ is bringing two modules based on the new core architecture into the market. As an NXP Early Access Partner for the i.MX8 X, TQ has already introduced the TQMa8Xx and...
Continue Reading![New TQ module based on ARM® Cortex®-A53 with i.MX8M Mini and Nano technology New TQ module based on ARM® Cortex®-A53 with i.MX8M Mini and Nano technology](https://www.electronics-lab.com/wp-content/uploads/2020/05/TQMa8MXML_schraeg-1024x682.jpg)
New TQ module based on ARM® Cortex®-A53 with i.MX8M Mini and Nano technology
The technology company TQ is expanding its i.MX8 product range with the new embedded module TQMa8MxML based on the i.MX8M Mini and Nano CPU family. It supports all nine CPU derivatives of the two families on the small LGA module and all signal pins are available in every...
Continue Reading![New series of Surface Mount Li-ion Battery Protector IC for Overcurrent and Overcharging Protection New series of Surface Mount Li-ion Battery Protector IC for Overcurrent and Overcharging Protection](https://www.electronics-lab.com/wp-content/uploads/2020/05/Li-ion-Battery-Protector-IC.jpg)
New series of Surface Mount Li-ion Battery Protector IC for Overcurrent and Overcharging Protection
Littelfuse, Inc. introduced the ITV Series, a three-terminal surface-mount Li-ion battery protector for protection against damages caused by overcurrent and overcharging. The ITV series consists of five compact surface-mount packages and are available in the current rating of 12A, 15A,...
Continue Reading![Single-Ended, 2-Channel GaN Class D Amplifier – Evaluation Board Single-Ended, 2-Channel GaN Class D Amplifier – Evaluation Board](https://www.electronics-lab.com/wp-content/uploads/2020/05/Infineon-Class-D-feat.jpg)
Single-Ended, 2-Channel GaN Class D Amplifier – Evaluation Board
The EVAL_AUDAMP24 e-mode GaN HEMT-based evaluation board from Infineon Technologies is a 2-channel, 225W/ch (4Ω at ±43V) or 250 W/ch (8Ω at ±63V) half-bridge class D audio power amplifier for high-end Hi-Fi audio systems. This evaluation board demonstrates how to use the IGT40R070D1...
Continue Reading![BMR464 DC/DC PoL Regulator BMR464 DC/DC PoL Regulator](https://www.electronics-lab.com/wp-content/uploads/2020/05/1392730709_Figure-3.jpg)
BMR464 DC/DC PoL Regulator
Flex Power Modules' 50 A digital point of load (PoL) regulator has horizontal and vertical mount options available Flex Power Modules' BMR464 regulator can be configured and monitored via PMBus® and measures 30.85 mm x 20.0 mm x 8.2 mm. It accepts input voltages from 4.5 V to 14...
Continue Reading![Aurora Mb E-Paper is an intelligent monochrome e-paper display Aurora Mb E-Paper is an intelligent monochrome e-paper display](https://www.electronics-lab.com/wp-content/uploads/2020/05/1.54_2-1024x751.png)
Aurora Mb E-Paper is an intelligent monochrome e-paper display
Pervasive Displays' intelligent monochrome e-paper with integrated timing controller, SPI, and 140 dpi glare-free display Pervasive Displays' e-paper technology offers a high level of readability under a wide range of lighting conditions. This Aurora Mb 1.54 inch monochrome...
Continue Reading![New DC/DC Converters Offer 50 Percent Smaller Footprint New DC/DC Converters Offer 50 Percent Smaller Footprint](https://www.electronics-lab.com/wp-content/uploads/2020/05/MYWGC.jpg)
New DC/DC Converters Offer 50 Percent Smaller Footprint
Murata unveiled the MYWGC series from the MonoBK™ DC/DC converter family. The new point-of-load (POL) modules offer a 50-percent smaller footprint than competing solutions and set new standards in size, efficiency and performance. The highly integrated, multi-output DC/DC...
Continue Reading![OKdo E1 Development Board OKdo E1 Development Board](https://www.electronics-lab.com/wp-content/uploads/2020/05/IMG_4215-004.jpg-WEBP-Image-3312-×-2484-pixels-Scaled-53--1024x536.png)
OKdo E1 Development Board
OKdo, part of the Electrocomponents Group, introduced its first own-branded single board computer (SBC), the E1. The OKdo E1 is an ultra-low-cost Development Board based on the NXP LPC55S69JBD100 dual-core Arm Cortex® M33 microcontroller. The E1 board is perfect for Industrial IoT,...
Continue Reading