Author: mixos

Introduces breakthrough ErgoTM edge inference processor, delivering 4+ TOPS sustained and 55 TOPS/W, capable of processing large neural networks in 20mW Selected by two of the leading providers of smart connected camera and security products to integrate advanced neural network...

The CT04120 from Murata is a small form factor lithium-ion battery that can support 10C Charging rates without the need for a battery controller IC. Continuous discharge at a 10C rate is also supported by these rechargeable batteries. In addition, since the internal resistance is low...

Compact and streamlined, the NISE 108 is NEXCOM’s newest industrial gateway. We’ve carefully selected each connectivity component to ensure your convenience and easy assembly. The thoughtful design further guarantees that the standalone embedded computer will withstand shock and...

A USB multitool for monitoring, hacking, and developing USB devices (work in progress) This is an early work-in-progress version of a USB multitool. LUNA isn't yet suited for end-users; but hardware development has reached a point where current-revision boards (r0.2+) make good...

This is a versatile tiny module that provides 10V/500mA from 90V DC input. It is a high voltage input DC-DC buck converter, based on LM5017 IC, which is a 100-V, 600-mA synchronous step-down regulator with integrated high side and low side MOSFETs. The constant on-time (COT) control...

Arduino Nano RS485 shield will help you to transmit and receive serial data using the twisted pair RS485 network. The module provides half-duplex communication. LED D1 indicates receive data, D2 Transmit LED, J1 jumper is optional and not in use in this application. DI/RE connected to...

The uP1966A from uPI Semiconductor is designed to drive both high-side and low-side GaN FETs in half-bridge topologies. It integrates an internal bootstrap supply and UVLO. The uP1966A has split gate outputs that can operate to several MHz on both high and low side drive channels,...

Apart from the risk of a (dangerous) electric shock and the near certainty of a very massive short circuit that is the consequence of drilling into a cable, the aftermath of this mishap is no fun either. In any case, the damaged cable has to be replaced – and that is already not nice...