Author: mixos
![iTRUBEC Minimonitor v1.0 – IoT for Bees iTRUBEC Minimonitor v1.0 – IoT for Bees](https://www.electronics-lab.com/wp-content/uploads/2018/05/img_20180520_102806_hdr_rHHZj1khYt.jpg)
iTRUBEC Minimonitor v1.0 – IoT for Bees
A beehive (and not only) monitor (temperature, atmospheric pressure, humidity and noise level) the size of a box of matches. iTRUBEC Minimonitor started as a side project to another our project - iTRUBEC - beehive heating - published recently. The objective was to build a tiny device...
Continue Reading![ATtiny85 20MHz Internal Clock ATtiny85 20MHz Internal Clock](https://www.electronics-lab.com/wp-content/uploads/2018/05/attiny20mhz-1024x476.jpg)
ATtiny85 20MHz Internal Clock
Here is a new tutorial from technoblogy.com on how to run ATtiny85 with internal 20MHz clock. The ATtiny85 is rated at a maximum clock speed of 20MHz at 4.5 – 5.5V. For some applications it would be nice to get the maximum speed without needing to buy a 20MHz crystal, or tie up two...
Continue Reading![ONYXX – A new wireless charger with 5000mAh capacity ONYXX – A new wireless charger with 5000mAh capacity](https://www.electronics-lab.com/wp-content/uploads/2018/05/features-01-1024x575.png)
ONYXX – A new wireless charger with 5000mAh capacity
NEW YORK, NY May 9th, 2018 — CheeNYC an NYC based company, are launching a new Wireless Charger/Power Bank named ONYXX. It will be the first Wireless Charger designed for outdoor use with water and dust resistant components starting at under $90. For active lifestyle or just casual...
Continue Reading![i.MX7 System-On-Module is only 55x30mm i.MX7 System-On-Module is only 55x30mm](https://www.electronics-lab.com/wp-content/uploads/2018/05/2018-05-15-jh-econ.jpg)
i.MX7 System-On-Module is only 55x30mm
Built around NXP/Freescale i.MX7 processor, e-con Systems' eSOMiMX7 System on Module comes in a small form factor of 55x30mm. [via] The eSOMiMX7 ready to use System-On-Module relies on a Solo / Dual core ARM Cortex A7 running at 1GHz along with a dedicated real time ARM...
Continue Reading![UP Core – Onboard WiFi, Bluetooth, and Storage Strengthen the World’s Smallest Maker Board UP Core – Onboard WiFi, Bluetooth, and Storage Strengthen the World’s Smallest Maker Board](https://www.electronics-lab.com/wp-content/uploads/2018/05/pgal_171102_ztz9c4.jpg)
UP Core – Onboard WiFi, Bluetooth, and Storage Strengthen the World’s Smallest Maker Board
(Taipei, Taiwan – May 15, 2018) – AAEON, a major developer of industrial embedded controllers and IoT solutions, announces the launch of the UP Core, the world’s smallest maker board. The 56.5mm x 66mm board draws on the breakthroughs made by AAEON’s UP and UP2 boards and...
Continue Reading![Newport GW6400/GW6404 SBC features 4x Mini-PCIe Sockets, 5x GbE and USB 3.0 Newport GW6400/GW6404 SBC features 4x Mini-PCIe Sockets, 5x GbE and USB 3.0](https://www.electronics-lab.com/wp-content/uploads/2018/05/Angle6400Final.png)
Newport GW6400/GW6404 SBC features 4x Mini-PCIe Sockets, 5x GbE and USB 3.0
Gateworks is proud to announce the release of the Newport GW6400 single board computer, featuring the Cavium Octeon TX® Dual/Quad Core ARM processor running up to 1.5GHz. The GW6400 is the latest Newport family member with an extensive list of features, including five Gigabit...
Continue Reading![IR Remote Wand based on ATtiny85 IR Remote Wand based on ATtiny85](https://www.electronics-lab.com/wp-content/uploads/2018/05/irremotewand-1024x182.jpg)
IR Remote Wand based on ATtiny85
David Johnson-Davies published another great project. It's an IR remote that supports the most popular control protocols. The IR Remote Wand is a universal remote control that you can program with up to five codes to control a variety of different products: It supports some of the...
Continue Reading![LoRa module in DIL form LoRa module in DIL form](https://www.electronics-lab.com/wp-content/uploads/2018/05/lora-breakout-600.jpg)
LoRa module in DIL form
Mare writes: Murata produces LoRa module CMWX1ZZABZ-xxx based on SX1276 transceiver and STM32L072CZ microcontroller. The soldering of the LGA module is not very hobby-friendly. I constructed small breakout PCB for this module with additional buck/boost switcher and place for SMA...
Continue Reading