Author: mixos
![GPS RECEIVER TO FM RADIO (88-107 MHz) AUDIO + RDS TRACKING V2 GPS RECEIVER TO FM RADIO (88-107 MHz) AUDIO + RDS TRACKING V2](https://www.electronics-lab.com/wp-content/uploads/2017/01/FM_GPS_PCB_TOP-1024x388.jpg)
GPS RECEIVER TO FM RADIO (88-107 MHz) AUDIO + RDS TRACKING V2
pinko @ blog.exrockets.com has build a GPS receiver to FM radio based on PIC18LF2553. He writes: Today I made some modifications to this is a new project for a GPS to FM radio tracking device for rockets i.e. the V2. The initial design lacked the antenna impedance matching circuit...
Continue Reading![AC Motor Speed Controller for Modern Appliances Using LS7311 AC Motor Speed Controller for Modern Appliances Using LS7311](https://www.electronics-lab.com/wp-content/uploads/2017/01/AC-MOTOR-CONTROLLER-USING-LS7311-1.jpg)
AC Motor Speed Controller for Modern Appliances Using LS7311
The project specifically designed for motor speed control application in appliances such as blenders, etc. Tact switches provided for selecting/indicating from 1 to 10 power levels ( Speed Levels). The project is ideal for universal and shaded-pole motor speed control for...
Continue Reading![ZeroPhone – a Raspberry Pi smartphone ZeroPhone – a Raspberry Pi smartphone](https://www.electronics-lab.com/wp-content/uploads/2017/01/DIY-mobile.png)
ZeroPhone – a Raspberry Pi smartphone
Arsenijs build a Pi-powered open-source mobile phone (that you can assemble for 50$ in parts). Currently, it costs about 50$ in parts, and all the parts are available on eBay. No BGA or other difficultly solderable ICs are used (with the obvious exception of Pi Zero). User interface...
Continue Reading![Thermometer That Pushes Arduino to Its Limits Thermometer That Pushes Arduino to Its Limits](https://www.electronics-lab.com/wp-content/uploads/2017/01/FW2K5WXIXUPZO6I.MEDIUM.jpg)
Thermometer That Pushes Arduino to Its Limits
by gundolf @ instructables.com: Starting playing with Arduino seems simple enough. You can find all sorts of tutorials, instructables, wiring and code examples for pretty much every sensor, component, or module available. So far so good. But when the time comes for building a more...
Continue Reading![Dual-Channel Quadrature Hall-Effect Bipolar Switch Module for Magnetic Encoder Dual-Channel Quadrature Hall-Effect Bipolar Switch Module for Magnetic Encoder](https://www.electronics-lab.com/wp-content/uploads/2017/01/Hall-Effect-Bipolar-Switch-PIC1.jpg)
Dual-Channel Quadrature Hall-Effect Bipolar Switch Module for Magnetic Encoder
The A1230 is a dual-channel, bipolar switch with two Hall-effect sensing elements, each providing a separate digital output for speed and direction signal processing capability. The Hall elements are photo lithographically aligned to better than 1 µm. maintaining accurate mechanical...
Continue Reading![MINI PIC GPS DATA LOGGER WITH MICRO-SD CARD MINI PIC GPS DATA LOGGER WITH MICRO-SD CARD](https://www.electronics-lab.com/wp-content/uploads/2017/01/TOP1-1024x861.jpg)
MINI PIC GPS DATA LOGGER WITH MICRO-SD CARD
pinko @ blog.exrockets.com has build a mini GPS data logger based on PIC18F25J11 microcontroller. Based on my first GPS data logger I made a new version which is even smaller than the initial design and should be able to fit in any rocket, RC model etc. The new GPS data logger uses...
Continue Reading![DIY Data logging weather station under $15 DIY Data logging weather station under $15](https://www.electronics-lab.com/wp-content/uploads/2017/01/FFAFLT8IXUQ3SIB.MEDIUM.jpg)
DIY Data logging weather station under $15
A Homeschoolers Workbench @ instructables.com has build an Arduino based datalogger that reads data from a DHT22 sensor and logs them on a SD card. In this instructable I am going to show you how to build a weather station that logs the information that it collects on a sd card. DIY...
Continue Reading![ICStripBoard – PCB rapid prototyping tool ICStripBoard – PCB rapid prototyping tool](https://www.electronics-lab.com/wp-content/uploads/2017/01/Business-Card-0.95.jpg)
ICStripBoard – PCB rapid prototyping tool
ICStripBoard is a innovative cheap tool to enable rapid prototyping of surface mount integrated circuits (IC’s) and allow their usage in prototype electronics projects. Inline surface mount IC’s come in a Variety of packages which are different sizes and these Printed...
Continue Reading