Author: mixos
![MYIR Launched i.MX 8M Plus SoM with AI/ML Capabilities MYIR Launched i.MX 8M Plus SoM with AI/ML Capabilities](https://www.electronics-lab.com/wp-content/uploads/2021/12/1.jpg)
MYIR Launched i.MX 8M Plus SoM with AI/ML Capabilities
After the former release of NXP i.MX 8M based MYC-JX8MX and i.MX 8M Mini based MYC-C8MMX System-on-Modules, MYIR has launched another advanced SoM MYC-JX8MPQ based on quad Arm Cortex-A53/M7 i.MX 8M Plus processor which is NXP’s first i.MX processor with a built-in 2.3 TOPS Neural...
Continue Reading![Analog Devices Inc. MAX31888 Digital Temperature Sensor Analog Devices Inc. MAX31888 Digital Temperature Sensor](https://www.electronics-lab.com/wp-content/uploads/2021/12/117199122.png)
Analog Devices Inc. MAX31888 Digital Temperature Sensor
Analog Devices Inc. MAX31888 Digital Temperature Sensor is a 1-Wire high precision, low power digital temperature sensor. The sensor has ±0.25ºC accuracy from -20ºC to +105ºC for precision temperature monitoring. The MAX31888 operates at 68μA operating current during measurement...
Continue Reading![Toshiba 2SA/2SC Bipolar Transistors Toshiba 2SA/2SC Bipolar Transistors](https://www.electronics-lab.com/wp-content/uploads/2021/12/199670766.png)
Toshiba 2SA/2SC Bipolar Transistors
Toshiba 2SA/2SC Bipolar Transistors are AEC-Q101 qualified and designed for low-frequency, AM, and audio frequency general purpose amplifier applications. The 2SA/2SC Transistors feature high voltage, high collector current, high hFE, and excellent hFE linearity. The Toshiba 2SA/2SC...
Continue Reading![Vishay VEML3235 Ambient Light Sensors Vishay VEML3235 Ambient Light Sensors](https://www.electronics-lab.com/wp-content/uploads/2021/12/VEML3235-1024x269.png)
Vishay VEML3235 Ambient Light Sensors
Vishay VEML3235 Ambient Light Sensors are advanced low power, high sensitivity sensors with I²C protocol interface and are designed by the CMOS process. These sensors houses photodiode, amplifiers, and analog circuits in a single chip and are easy to operate using simple I²C commands....
Continue Reading![New 13.56MHz Wireless Power Supply Chipset for Wearable Devices and Industrial Equipment New 13.56MHz Wireless Power Supply Chipset for Wearable Devices and Industrial Equipment](https://www.electronics-lab.com/wp-content/uploads/2021/12/Wireless-Power-Transfer-Chipset.jpg)
New 13.56MHz Wireless Power Supply Chipset for Wearable Devices and Industrial Equipment
ROHM Group company LAPIS Technology has developed a new chipset that utilizes the 13.56MHz frequency band for both wireless power supply and Near Field Communication (NFC) and contributes to improved design flexibility in devices with rotating mechanisms that would be restricted by...
Continue Reading![Make a BLE enabled Smart Bulb with STM32 and BleuIO Make a BLE enabled Smart Bulb with STM32 and BleuIO](https://www.electronics-lab.com/wp-content/uploads/2021/12/warning_sign.jpg)
Make a BLE enabled Smart Bulb with STM32 and BleuIO
Home automation involves automating household environment equipment. To achieve that, we have created a smart bulb that is easy to install, and the attached equipment can be controlled over a web browser or smartphone app. The aim of this project is to control different home appliances...
Continue Reading![Pre-Amplifier for MEMS Microphone Pre-Amplifier for MEMS Microphone](https://www.electronics-lab.com/wp-content/uploads/2021/12/009.jpg)
Pre-Amplifier for MEMS Microphone
This is a low-cost, small-size audio pre-amplifier for MEMS microphone, OPAMP-based circuit amplifies the low-level analog signal coming from MEMS microphone to the desired level required for the next stage which is an audio amplifier, basically microphone level to line level. Resistor...
Continue Reading![BCS Series Low Illumination Film Solar Cells BCS Series Low Illumination Film Solar Cells](https://www.electronics-lab.com/wp-content/uploads/2021/12/BCS-Series-Solar-Cells-FULL.jpg)
BCS Series Low Illumination Film Solar Cells
TDK's BCS series solar cells can be customized according to various shapes and applications TDK's BCS series are thin, lightweight, and flexible solar cells offering high power generation efficiency under fluorescent and LED light sources. The cells are made of amorphous silicon...
Continue Reading