Author: Debashis Das

The OBJEX Link S3LW is an IoT development board built for battery-powered operations. The board features a custom S3LW system-on-module (SoM) built around the ESP32-S3 MCU. The board supports Wi-Fi, Bluetooth 5, LoRa, and LoRaWAN communication protocols and features 33 GPIOs, I2C, I2S,...

Radxa X4 is an Intel Processor N100 powered single board computer(SBC) in a Raspberry Pi 5 form factor. The board offers almost the same features as a Raspberry Pi including dual mini HDMI output, USB, 40-pin GPIO, and LPDDR5 RAM options. But this board has much more than just copied...

Cervoz MEC-LAN-2631i is a PCIe Ethernet expansion card in an M.2 2230 A+E key form factor. The card is industrial grade and provides 2.5GbE Ethernet capabilities with a PCIe x1 interface. With this design, the card can provide a 2.5GbE port in case you need an additional port on your...

Quartz64 Zero SBC from Pine64 is a small and inexpensive single-board computer. This board incorporates the Rockchip RK3566T SoC, which comprises a quad-core ARM Cortex-A55 1.6GHz CPU and a Mali-G52-2EE GPU. It can drive a single 4K display at 60fps and remains cool even when under...

Windows 11 IoT Enterprise 2024 LTSC is a new operating system for embedded and IoT devices. It offers enhanced features like Wi-Fi 6/7 and USB 4 support, along with advanced security and device management capabilities. Microsoft provides two update models, CBB/GAC and LTSC, for...

The AIC8800 Wi-Fi 6 USB Adapter is an AX300 USB adapter based on the AIC8800 chipset, the more adept sells on Aliexpress for under $3 and can be considered one of the cheapest Wi-Fi 6 USB Adapters that can be found on the market. The adapter only supports 2.4GHz Wi-Fi and does not...

SB Components StackyFi is an ESP32-S3 powered development board in a Raspberry Pi Zero Form Factor. The board features a 40-pin GPIO header which is compatible with most Raspberry Pi HAT. The board also has dual USB-C ports (one native, one for serial debugging), an IMU sensor, an RGB...

High Torque Robotics Mini π is a 54cm tall bipedal robot built around the Orange Pi 5 SBC with Rockchip RK3588S for better performance and control. The robot has 12 degrees of freedom(DOF) with 12 custom joint motors, allowing it to walk, dance, run, jump, and flip. Designed for...