Author: Debashis Das

The Pico Display Base Board is a compact PCB board designed to simplify the creation of projects using a Raspberry Pi Pico and an LCD screen. The board includes onboard components like buttons and LEDs, as well as ports for additional modules like an RTC module, OLED display, or...

LILYGO T-Energy-S3 is an ESP32-S3 WiFi and Bluetooth-enabled IoT development board with an 18650 battery holder, a USB-C port for charging and programming, and plenty of I/Os thanks to two 20-pin GPIO headers and a Qwiic connector. The main attraction of this board is its 18650 battery...

Compex Dual-band Wi-Fi 7 Modules the WLE7002E25D and the WLT7002E25D-E are designed to enhance Wi-Fi reliability by giving you an upgrade from Wi-Fi6 and 6E modules that we have been using for a couple of years now. The WLE7002E25D uses a MiniPCIe form factor, while the WLT7002E25D-E...

Luckfox Pico Ultra is a Rockchip RV1106-based micro Linux dev board with 0.5 Tops NPU to run AI that can be configured to run AI tasks. The board also features a MIPI CSI port, an Ethernet port GPIO, UART, RGB LED header, SPI, I2C, USB, a speaker interface, and much more. Waveshare also...

ilyT-Glass is an ESP32-S3-powered smart glasses with a smart Bosch AI IMU. The Bosch IMU is an AI smart sensor that integrates a 6-axis IMU, a 32-bit customizable programmable microcontroller, and various software functionalities. With these functionalities, this can be used in...

Forlinx FET3562J-C is a Rockchip RK3562/RK3562J-based System On Module (SoM) designed for IoT, automation, and consumer electronic applications. The SoC used in the module is built with the latest 22nm process with ARM Cortex-A53 cores running at up to 2GHz, which makes it very...

Infineon CY8CKIT-062S2-AI Dev Kit is a PSoC 62S2 MCU-powered development board built to create and test edge AI applications. The unique aspect of this board is that it features a plethora of sensors including a microphone, radar, IMU, magnetometer, and an air pressure sensor which can...

The LILYGO T-Encoder-Pro is an ESP32-S3-based rotary encoder with a 1.2-inch AMOLED touchscreen display. The touchscreen features a 390×390 pixels resolution and has a pair of Qwiic connectors for additional peripheral support. The device also includes an onboard buzzer for auditory...