MicroBeast is A Z80-Based DIY 8-Bit Computer Kit
DIY

MicroBeast is A Z80-Based DIY 8-Bit Computer Kit

MicroBeast is an eight-bit, Z80-based DIY computer kit built using readily available components. The device features a built-in keyboard, a unique 24-character display,  USB-C for power, and various I/O options. Additionally, it integrates the CP/M operating system, which allows users...

Continue Reading
1.275
Views
0 Comments
Pi-Cast KVM: A Portable KVM Built with a Raspberry Pi CM4 Module
Raspberry Pi

Pi-Cast KVM: A Portable KVM Built with a Raspberry Pi CM4 Module

Powered by PYKVM, Pi-Cast KVM is a Raspberry Pi CM4-based KVM (Keyboard, Video, Mouse) solution that enables users to control and manage multiple devices remotely regardless of operating systems. The device can also control connected devices remotely, through the web browser interface...

Continue Reading
1.248
Views
0 Comments
8Devices Noni M.2(A+E) WiFi 7 Module Features FirmUX Framework
SoM-CoM

8Devices Noni M.2(A+E) WiFi 7 Module Features FirmUX Framework

8devices has just announced a new WiFi 7 module with M.2 A+E-Key, the module is built on top of the QCN9274/QCN6274 chipsets and can achieve up to 11Gbps transfer rate in MIMIO or Split configurations. The device uses the FirmUX-embedded Linux OS as the interface. The Noni modules can...

Continue Reading
1.116
Views
0 Comments
Youteetoo Cyboboard R1 features Rockchip RK3588S, M.2 sockets, NFC, and numerous rich functionalities
SBC

Youteetoo Cyboboard R1 features Rockchip RK3588S, M.2 sockets, NFC, and numerous rich functionalities

Youteetoo has just released the Youteetoo Cyboboard R1 or in short Youyeetoo R1, it is a Rockchip RK3588S-based SBC in a 100×69.3mm form factor. The board is tiny but packs a boatload of features including two M.2 ports, WiFi and Bluetooth connector, NFC, four display interfaces, dual...

Continue Reading
1.103
Views
0 Comments
D3’s Advanced Radar Development Kit Simplifies RF Development Challenges
RFTop Stories

D3’s Advanced Radar Development Kit Simplifies RF Development Challenges

Built on Texas Instruments' AWR2944 RFIC, D3’s mmWave Radar Sensor Evaluation Kit offers a production-ready platform for efficient and versatile field testing, sensor evaluation, and algorithm development. The DesignCore RS-2944A mmWave Evaluation Kit features the TI AWR2944, a...

Continue Reading
1.106
Views
0 Comments
EDATEC Unveils Two New Fanless Cases for Raspberry Pi 5
Raspberry PiTop Stories

EDATEC Unveils Two New Fanless Cases for Raspberry Pi 5

With great power comes great responsibility, and in the world of computing, greater power often leads to significant heat generation. This seems to be the case with the new Raspberry Pi 5, so much so that they had to introduce an active cooler to cool the Pi. Active coolers are well...

Continue Reading
1.221
Views
0 Comments
EDATEC ED-IPC3020 is A Fanless RPi 5 PC with M.2 SSD and RS485/RS232 Interfaces
Raspberry Pi

EDATEC ED-IPC3020 is A Fanless RPi 5 PC with M.2 SSD and RS485/RS232 Interfaces

The EDATEC ED-IPC3020 is a fanless PC based on the Raspberry Pi 5. It stands out because it supports NVMe M.2 SSD and features RS232 and RS485 serial ports. It also offers the standard I/O capabilities of the Raspberry Pi 5. The new Raspberry Pi 5 SBC has a PCIe 2.0x1 interface that...

Continue Reading
1.225
Views
1 Comments
STMicroelectronics unveils the VL53L8CX ToF Sensor
Sensor

STMicroelectronics unveils the VL53L8CX ToF Sensor

STMicroelectronics recently unveiled the VL53L8CX, a new Multi-Zone Time-of-Flight (ToF) distance sensor, that has a daylight range of 285cm, a significant improvement over the 170cm range of its predecessor, the VL53L5CX. In 2021, STMicro first introduced its first multi-zone ToF...

Continue Reading
1.185
Views
0 Comments
Get new posts by email:
Get new posts by email:

Join 97,426 other subscribers

Archives