Author: Saumitra Jagdale
STM32 IoT Discovery Kit for Cellular Applications: B-L462E-CELL1
The STM32 IoT Discovery Kit, commonly known as B-L462E-CELL1, is a ready-to-use development platform for cellular IoT devices created by STMicroelectronics. According to ST, the Discovery kit integrates a discovery mainboard powered by an LBAD0ZZ1SE module, a global coverage antenna,...
Continue ReadingAdafruit QT Py RP2040 Development Board Features Large Storage Memory
With the growing popularity of the Raspberry Pi's RP2040 and its powerful features, many third-party manufacturers have come up with hardware based on this chip, such as the Adafruit's Feather RP2040, ItsyBitsy RP2040, and Pimoroni Tiny2040. The company has turned its attention to...
Continue ReadingSwitchmode Power Supply Topologies Explained
The role of power supply is crucial for electronic circuits because without sufficient power, the circuit cannot function at its optimal level. On the other hand, an exceeded power supply can deteriorate the circuit components by heating effect. There are usually two choices for power...
Continue ReadingHow to Build a Mini Mac Classic with Raspberry Pi and 3D Printing
The Mini Mac Pi is another project developed by Ruiz Brothers on the Adafruit Learning System. This miniature MAC comes with Raspberry Pi, 320x240 Mini touch screen display, and a speaker. This article will focus on building the Mini Mac classic with 3D printing and the Raspberry...
Continue ReadingMaker Pi RP2040 Robot Controller Board for Motion Control Projects
Cytron recently launched their second RP2040 board, the Maker Pi RP2040, designed for robots or motion-controlled applications. With this new RP2040 chip, you can now build your own interactive robot, the Otto DIY robot. The Maker Pi RP2040 combines the Raspberry Pi Pico with the Maker...
Continue ReadingValar Systems’ WiFi Stepper Motor Board with StallGuard Technology
Controlling stepper motors over a WiFI network opens up the possibilities for the integration of wireless and automation functions to your motor applications. We saw a WiFi Stepper board by Good Robotics in January 2019, it featured control over Wifi and enabled an IoT interface for any...
Continue ReadingHow to Build a TinyML Smart Weather Station using Wio Terminal
You might have seen many ML-based projects for weather predictions. Where training of an ML model is followed by testing of the model for good accuracies. This tutorial will learn to deploy a similar type of ML model using an on-board TensorFlow Lite on the Wio Terminal. You will see...
Continue ReadingRP2040 M.2 Card with M.2 Connectivity Form Factor
There has been a lot of discussion about the Raspberry Pi’s RP2040 SoC in the past few months after the release of the Raspberry Pi Pico. The RP2040 SoC is also popular for its high-frequency clock covering a large range of applications at a very low cost. Timonsku a hardware designer...
Continue Reading