4 CHANNEL INFRARED REMOTE MODULE
Control

4 CHANNEL INFRARED REMOTE MODULE

4 Channel Infrared (IR) Remote is a simple project using the popular  HT12A and HT12D encoder / decoder chips from Holtek. Specifications Supply – Transmitter: 2.4 ~ 5 VDC, 5 V @ 20 mA & Receiver: 5 ~ 6 VDC, 5 V @ 50 mA  Output – 4 Latched/Momentary TTL compatible...

Continue Reading
6.089
Views
0 Comments
Transient Voltage Suppressors
Basic Electronics

Transient Voltage Suppressors

Voltage suppressors are used to protect circuits from unwanted transients, when other devices like diodes and capacitors fail to do so. Transient effects have various sources and are able to damage the connected parts and ICs if not properly measures taken. In this article we will discuss...

Continue Reading
16.476
Views
1 Comments
PIC24 bedside table alarm clock
Mcu

PIC24 bedside table alarm clock

Markus Gritsch posted pictures and code of his PIC24 bedside table alarm clock: Another year, another clock, but for the first time for my alarm clocks. I am not using an MSP430 but a PIC24 instead. Standby current is with 5.5 µA only slightly higher than that of my MSP430 based...

Continue Reading
4.541
Views
0 Comments
3A Variable Bench PSU with Color Display
Mcu

3A Variable Bench PSU with Color Display

by SHARANYADAS @ instructables.com: I am playing with electronics since i was a child and made numerous circuits.But still now,i didn't made any power supply unit for general purpose use.So tired of making PSU for each circuit,I decided to make a stable Bench PSU for general purpose...

Continue Reading
5.702
Views
0 Comments
Electronic Live Capture Mousetrap
Mcu

Electronic Live Capture Mousetrap

A mousetrap is a type of animal trap specialize to catch small animals, particularly rodents like rats, mice, hamsters, etc. This project is a kind of mousetrap that is intended to keep a captured animal alive. In this way, the hunter can release the captured animal later to the...

Continue Reading
4.499
Views
0 Comments
Makerarm – The first robotic arm that makes anything, anywhere
Tools

Makerarm – The first robotic arm that makes anything, anywhere

Makerarm just lauched on kickstarter. It's a penknife for the DIY world, it can make almost anything by changing the toolhead! A complete digital fabrication system for makers everywhere: 3D print, laser, carve, plot, assemble, pick/place + more on your desktop! Makerarm works...

Continue Reading
7.354
Views
0 Comments
The femtocell technology
Technology

The femtocell technology

by Slovati @ dev.emcelettronica.com: Femtocells are basically low-power wireless access points that operate inside licensed frequency bands for connecting standard mobile devices with a provider’s network, using a broadband connection such as the DSL or a cable connection...

Continue Reading
4.461
Views
0 Comments
Fastest, highest-resolution DLP chipset for 3D print/lithography
IC

Fastest, highest-resolution DLP chipset for 3D print/lithography

by Graham Prophet @ edn-europe.com: With its latest micro-mirror-based light-steering chip, Texas Instruments says, applications developers can innovate with more than 4 million micromirrors to enable high throughput digital imaging applications. Presented as its highest speed...

Continue Reading
11.087
Views
0 Comments
Get new posts by email:
Get new posts by email:

Join 97,426 other subscribers

Archives