How to Make an Internet Speed Analyzer
Miscellaneous

How to Make an Internet Speed Analyzer

This is an internet speed Analyzer based on Raspberry Pi: This application will run speedtest-cli against speedtest.net's servers using cron. It will then email the results daily and weekly. Also - using http://www.percheron-electronics.uk/shop/ e-paper hat - you can utilize the...

Continue Reading
4.733
Views
0 Comments
Lie Detector and Biofeedback Arduino Based
Arduino

Lie Detector and Biofeedback Arduino Based

by masteruan @ instructables.com: This tutorial will explain how to build a machine for biofeedback. But first a bit of theory. What is biofeedback? Biofeedback is the process of gaining greater awareness of many physiological functions primarily using instruments that provide...

Continue Reading
8.340
Views
0 Comments
Wrist Mount Digital Altimeter
Mcu

Wrist Mount Digital Altimeter

This project is a simple wrist mount digital altimeter which is a device used to determine altitude. This design uses atmospheric pressure to calculate the altitude of its location. The lower the atmospheric pressure, the higher the altitude. The project is comprised of a...

Continue Reading
5.628
Views
0 Comments
Motorcycle custom instrument panel
LCD/OLED/ePaperMcu

Motorcycle custom instrument panel

Josh from Colorado build a nice dashboard for this motorcycle based on ATMega128 and EPSON S1D13700 LCD Screen: Since the GSXR is now a street fighter the factory gauges won’t do, and I wanted something I could log air/fuel ratios with so I can jet the bike. I went a little...

Continue Reading
8.606
Views
0 Comments
Open Badge: The LED Badge
Led

Open Badge: The LED Badge

Rohit Gupta published a new build, the OpenBadge The major elements on the PCB were: – LED Matrix – A MSP430G2553 microcontroller brain – A ULN2803 Darlington Driver to sink the current – A USB connector to charge the battery – A SBW connector to program the...

Continue Reading
4.524
Views
0 Comments
Portable GPS Data Logger
GPS

Portable GPS Data Logger

elm-chan.org has build a portable GPS logger based on ATMega328 mcu: I have built a GPS Logger and it works very well to trace the drove route for two years. By the way, the navigation solution computed by GPS receiver itself has an excellent accuracy without DGPS because an...

Continue Reading
6.832
Views
0 Comments
DIY milliohmmeter
Test/Measurements

DIY milliohmmeter

by hwmakers.eu: This is an example of a simple and cheap milliohmmeter that can be made by every maker. The core of the circuit are a current source (LT3092) and a current sense (INA225): a costant current flows through the milliohm resistor under test and the voltage at the current...

Continue Reading
11.022
Views
0 Comments
Anti-Drowsiness Alarm
Miscellaneous

Anti-Drowsiness Alarm

This reference design is an anti-drowsiness alarm, which aims to keep the drivers alert by disrupting one’s drowse. According to the study by U. S. National Highway Traffic Safety Administration (NHTSA), drowsy driving is the primary contributor of at least 100,000 auto crashes a...

Continue Reading
4.954
Views
0 Comments
Get new posts by email:
Get new posts by email:

Join 97,426 other subscribers

Archives