Digital Hearing Aid using MKL02Z16VFG4
Audio

Digital Hearing Aid using MKL02Z16VFG4

A hearing aid is a small electronic device worn in or behind the ear that amplifies incoming sounds to help people with hearing impairment. This design features a light and compact hearing aid with a soft touch sensor that allows the user to control the volume and frequency depending...

Continue Reading
14.586
Views
1 Comments
Colour Injector lamp
Light

Colour Injector lamp

by Taras Sgibnev: The colour of light emitted by this lamp can be controlled using syringes filled with red, green and blue ink. Russian designer Taras Sgibnev developed the interactive product as a physical expression of the way red, green and blue light are used in digital...

Continue Reading
13.341
Views
0 Comments
Damp-Pi – Room Moisture Extraction with Raspberry Pi
Control

Damp-Pi – Room Moisture Extraction with Raspberry Pi

by davidhunt.ie : Over the last while I’ve been having a problem with excess humidity in the shower rooms. Imagine that, the builder never put in extractor fans when the house was built! Anyway, I could put in those fancy extractor fans with the built in timers or humidity...

Continue Reading
5.277
Views
0 Comments
Arduino Email Sender with Ethernet adapter/shield
Arduino

Arduino Email Sender with Ethernet adapter/shield

by Matej Blagšič @ instructables.com: My father asked me to do a little project with Arduino that would send an e-mail when a push button is pressed or anything, can be based on temperature reading, so make sure you watch my previous instructable on that or to send that something...

Continue Reading
7.641
Views
0 Comments
EEVblog #790 – Lecroy Wavejet 354 Touch Oscilloscope Teardown
Youtube

EEVblog #790 – Lecroy Wavejet 354 Touch Oscilloscope Teardown

Take a look inside the 500MHz 4 channel Teledyne Lecroy WaveJet Touch 354 oscilloscope. EEVblog #790 - Lecroy Wavejet 354 Touch Oscilloscope Teardown -...

Continue Reading
5.298
Views
0 Comments
100V, 1A, synchronous step-down regulator: Iq of 7µA
IC

100V, 1A, synchronous step-down regulator: Iq of 7µA

by Graham Prophet @ edn-europe.com: LT8631 is a 1A, 100V-input-capable synchronous step-down switching regulator. Synchronous rectification delivers efficiency as high as 90% while Burst Mode operation keeps quiescent current under 7µA in no-load standby conditions. Its 3V to...

Continue Reading
6.623
Views
0 Comments
Tutorial on the Design & Implementation of an FPGA RGB LED Matrix Driver
LedYoutube

Tutorial on the Design & Implementation of an FPGA RGB LED Matrix Driver

In this episode Shahriar and Timo demonstrate the design methodology of an FPGA based 32×32 RGB LED matrix driver. Timo has kindly devoted some of his time to describe the block diagram and the thought process which goes into designing this type of FPGA display driver. The various...

Continue Reading
12.865
Views
0 Comments
Atmega8 Development Board
Mcu

Atmega8 Development Board

Atmega8 Development Board provides a very simple and cost effective platform for prototyping solution.  The compact design provides connection to all the pins of the microcontroller for the user. Prototyping solution available for 28-pin ATmega series AVR microcontroller from...

Continue Reading
8.657
Views
1 Comments
Get new posts by email:
Get new posts by email:

Join 97,426 other subscribers

Archives