ATmega16/32 Development Board provides a very simple and cost effective platform for prototyping solution.  The compact design provides connection to all the pins of the microcontroller for the user. Prototyping solution available for 40-pin ATmega series AVR microcontroller from...

GLCD Adapter Board offers an easy way to interface a standard GLCD to your project. GLCD MODULE -...

The RF power amplifier stage is usually the final active block of any electronic system that is transmitting RF power. Relatively low power RF signals are amplified to produce a more powerful signal in order to be transmitted over greater distance. RF output power can range from a few...

by Susan Nordyk @ edn.com: Housed in a tiny 2×2-mm, 6-pin DFN package, the MAQ5300 voltage regulator from Micrel boasts a dropout of only 100 mV at 300 mA. The AEC-Q100-qualified part is suitable for space-constrained and high-reliability applications that are subjected to the...

Steve’s latest project, a wireless MQTT battery monitor: This board uses an ESP8266 (ESP12), a Texas Instruments INA226 I2C voltage and current monitor, and a Texas Instruments LMR12010X buck converter. This board is designed to wirelessly monitor 12 volt batteries and power...

Armadillo 43T integrates a 4.3" TFT display, resistive touch panel and a single board computer with Linux OS into one compact unit. Armadillo 43T is suitable for everyone, who needs a complete microcomputer with a display – “all in one solution”. Armadillo 43T is driven...

This project primarily consists of four units: Microchip Technology's SST89E54RDA-40-C-PIE, a sensor unit, an ADC0804 ADC component and the LCD module. Along with detecting an obstacle, its exact distance is also calculated and displayed on a 16x2 LCD interfaced to the...

by Archie500 @ instructables.com: In a very brief summary it works as follows: The Raspberry Pi uses SNMP (Simple Network Management Protocol) to get the WAN data rates from the router and then displays these graphically on the OLED screen. The Raspberry Pi was already set up as...