Raspberry Pi Global Shutter Camera
A specialized 1.6-megapixel camera that can capture rapid motion without introducing artifacts typical of rolling shutter cameras. Ideal for fast motion photography and machine vision applications. A camera for motion photography and machine vision The Raspberry Pi Global Shutter...
Continue ReadingTexas Instruments OPT3005 Ambient Light Sensor (ALS)
Texas Instruments OPT3005 Ambient Light Sensor (ALS) is a single-chip lux meter measuring the intensity of light as visible by the human eye. The extreme IR rejection and precision spectral response of the OPT3005 enable it to accurately meter the intensity of light as seen by the human...
Continue ReadingAntenova M20072 GNSS Receiver Module
Antenova M20072 GNSS Receiver Module is integrated with MediaTek AG3335MN flash chip using a 12nm process to bring unmatched power efficiency. This receiver module tracks 4 GNSS constellations concurrently including GPS/GALILEO/GLONASS/BEIDOU/QZSS. The M20072 GNSS module is optimized...
Continue ReadingS-5701 B Series TMR Sensor ICs
ABLIC's sensor ICs are compact and offer durability with a long life ABLIC's S-5701 B series of TMR sensor IC's, with a TMR element and signal processing circuit are mounted and resin-molded on the same silicon, offering extreme durability. They are available in small, thin...
Continue ReadingA Sneak Peak into WIZnet board – W6100-EVB-PICO.
W6100-EVB-Pico is a microcontroller evaluation board that is based on the Raspberry Pi RP2040 and features a fully hardwired TCP/IP controller, W6100. It basically functions in the same manner as the Raspberry Pi Pico board, but it also includes additional Ethernet connectivity through...
Continue ReadingReviewing M5 Stack’s Transparent 1.5 inch OLED Glass Unit
Unit Glass is a transparent OLED expansion screen unit that measures 1.51 inches in size. It uses a driver scheme that is based on STM32 and SSD1309, has a resolution of 128x64 px and a monochrome display, and its transparent area is 128x56 px. The MCU is an STM32F030F4P6, which...
Continue ReadingFlux Launches Collaborative PCB Design Tool
Flux, a collaborative PCB design tool, has emerged from beta testing with a new set of features. The company says its mission is to make PCB design as accessible as possible to everyone, regardless of experience level. Flux is a browser-based PCB design tool that was created to make PCB...
Continue ReadingWeb Serial Terminal is a usefull Web Tool for Embedded Engineers
The team at CAPUF Embedded is developing web tools to enable embedded engineers to create products more quickly and effortlessly. Their first tool is a web serial terminal, accessed through Chrome Browser on laptops or desktops, though not yet on mobile devices. With this tool,...
Continue Reading