![New 150V N-channel Power MOSFET with Low On-Resistance to Improve Power Supply Efficiency New 150V N-channel Power MOSFET with Low On-Resistance to Improve Power Supply Efficiency](https://www.electronics-lab.com/wp-content/uploads/2022/03/N-channel-power-MOSFET.jpg)
New 150V N-channel Power MOSFET with Low On-Resistance to Improve Power Supply Efficiency
Toshiba has launched a 150V N-channel power MOSFET “TPH9R00CQH” that uses the latest generation process, “U-MOSX-H,” and that is suitable for use in switching power supplies for industrial equipment - including those deployed in data centers and communications base stations....
Continue Reading![Battery on a motherboard – Choosing the right one Battery on a motherboard – Choosing the right one](https://www.electronics-lab.com/wp-content/uploads/2022/03/Depositphotos_443636210_L-1024x682.jpg)
Battery on a motherboard – Choosing the right one
All motherboards are equipped with a CMOS battery. In the past, it was necessary to maintain the operation of the CMOS memory, which was responsible for storing BIOS data and other parameters of a personal computer. Previously, BIOS settings were stored in CMOS memory which was powered...
Continue Reading![PiSquare Introduction – an RP2040 & ESP-12E based board PiSquare Introduction – an RP2040 & ESP-12E based board](https://www.electronics-lab.com/wp-content/uploads/2022/03/IMG_4353-scaled-e1648655175882-1024x548.jpg)
PiSquare Introduction – an RP2040 & ESP-12E based board
Onboard-RP2040 | USB-C Type Port | Multiple HAT Connectivity | ESP8266 | 0.91 OLED | 40-Pins GPIO Connectivity | 16 Mega-Byte Flash There are several ways where you can find PiSquare very useful, as we were bound to use a single HAT on Raspberry Pi or max to max 5 Raspberry Pi HATs...
Continue Reading![AAEON Announces the PICO-TGU4-SEMI, an Embedded Board with 11th Generation Intel® Core™ i7/i5/i3/Celeron® U-Series Processor SoC AAEON Announces the PICO-TGU4-SEMI, an Embedded Board with 11th Generation Intel® Core™ i7/i5/i3/Celeron® U-Series Processor SoC](https://www.electronics-lab.com/wp-content/uploads/2022/03/PICO-TGU4-SEMI.jpg)
AAEON Announces the PICO-TGU4-SEMI, an Embedded Board with 11th Generation Intel® Core™ i7/i5/i3/Celeron® U-Series Processor SoC
AAEON, an industry leader in embedded solutions, is delighted to announce the PICO-TGU4-SEMI, a new addition to its range of compact Pico-ITX boards. With an 11th Gen Intel® Core™ i7/i5/i3/Celeron Processor SoC, the PICO-TGU4-SEMI has extremely high CPU performance, and is the...
Continue Reading![New Advanced Graphite Embedding Capability for PCB Thermal Management New Advanced Graphite Embedding Capability for PCB Thermal Management](https://www.electronics-lab.com/wp-content/uploads/2022/03/Labtech_Graphite_Figure-scaled-1024x827.jpg)
New Advanced Graphite Embedding Capability for PCB Thermal Management
New innovation provides weight savings for applications where size, weight and power (SWaP) are key Teledyne Labtech announces a major new capability allowing the embedding of layers of synthetic graphite within RF and microwave printed circuit boards (PCBs). Heat management is a...
Continue Reading![MP6612 – 45V, 5A, H-Bridge DC Motor Driver with Current Sense and IN1/IN2 Logic Inputs MP6612 – 45V, 5A, H-Bridge DC Motor Driver with Current Sense and IN1/IN2 Logic Inputs](https://www.electronics-lab.com/wp-content/uploads/2022/03/mp6612_tac.jpg)
MP6612 – 45V, 5A, H-Bridge DC Motor Driver with Current Sense and IN1/IN2 Logic Inputs
The MP6612 from Monolithic Power Systems is a Half-Bridge DC Motor Driver that is used for driving reversible motors. It requires an input voltage of 4-45 V for operation and has an output current of up to 5 A. The motor driver consists of four N-channel power MOSFETs and an internal...
Continue Reading![Teledyne e2v HiRel Announces New 100 V High-Speed 20 MHz FET and GaN Transistor Driver Flip Chip Die Teledyne e2v HiRel Announces New 100 V High-Speed 20 MHz FET and GaN Transistor Driver Flip Chip Die](https://www.electronics-lab.com/wp-content/uploads/2022/03/Teledyne-HiRel-99102-GaN-Driver-Die-for-Release-1024x958.jpg)
Teledyne e2v HiRel Announces New 100 V High-Speed 20 MHz FET and GaN Transistor Driver Flip Chip Die
Teledyne e2v HiRel announces the new TD99102 UltraCMOS® High-speed FET and GaN transistor driver offering a very high switching speed of 20 MHz. The new flip-chip part is ideal for driving Teledyne HiRel’s 100 V high-reliability GaN HEMT devices in DC-DC, AC-DC converters, orbital...
Continue Reading![Kyocera AVX PrizmaCap™ Supercapacitor is 3500 mF Kyocera AVX PrizmaCap™ Supercapacitor is 3500 mF](https://www.electronics-lab.com/wp-content/uploads/2022/03/140244748.png)
Kyocera AVX PrizmaCap™ Supercapacitor is 3500 mF
Kyocera AVX PrizmaCap™ Capacitors use an activated carbon electrode and have a propylene carbonate-based (PC) electrolyte with a paper separator and SMT leads. The PrizmaCap current collector is made of a special low ESR-type aluminum. The PrizmaCap features a cell voltage of...
Continue Reading