Texas Instruments TCA9536 4-Bit I/O Expander
IC

Texas Instruments TCA9536 4-Bit I/O Expander

Texas Instruments TCA9536 4-Bit I/O Expander is for the I2C bus and is designed for 1.65V to 5.5V VCC operation. It provides general-purpose remote I/O expansion for most microcontroller families via the I2C interface. The system controller can enable the I/Os as either inputs or...

Continue Reading
1.168
Views
0 Comments
SiT8021 – 1 to 26 MHz – Ultra-Small µPower Oscillator
IC

SiT8021 – 1 to 26 MHz – Ultra-Small µPower Oscillator

SiTime's ultra-small micropower 1 MHz to 26 MHz oscillators are ideal for battery-powered mobile, wearable, and IoT devices SiTime's SiT8021 oscillator is 90% lower in power consumption and 40% smaller in size than quartz oscillators. The unmatched combination of ultra-low power, an...

Continue Reading
1.125
Views
0 Comments
MF-LSMF Series High-Power PPTC Resettable Fuses
Parts

MF-LSMF Series High-Power PPTC Resettable Fuses

Bourns' high-power surface-mount PPTC resettable fuses expand the hold current range to 0.75 A ~ 6.0 A Bourns' Multifuse® product line expands its model MF-LSMF series high-power surface-mount polymeric positive temperature coefficient (PPTC) resettable fuses. These models expand the...

Continue Reading
1.125
Views
0 Comments
3-MP image sensor targets security surveillance, IP, and HD cameras
Parts

3-MP image sensor targets security surveillance, IP, and HD cameras

Omnivision’s OS03B10 3-MP image sensor with DVP and MIPI interface support brings high-quality images to security, IP, and HD cameras. Omnivision has introduced the OS03B10 3-megapixel (MP) 1/2.7-inch optical format CMOS image sensor for security surveillance, IP, and HD analog...

Continue Reading
1.112
Views
0 Comments
EPC9160 Synchronous Buck Converter Reference Design
Power supply

EPC9160 Synchronous Buck Converter Reference Design

EPC's EPC9160 9 V to 24 V to dual output 5 V/3.3 V synchronous buck converter reference design EPC's EPC9160 is a 9 V to 24 V to dual output 5 V/3.3 V, 15 A synchronous buck converter operating at 2 MHz switching frequency. The EPC9160 features the EPC2055 GaN FET and LTC7890 two-phase...

Continue Reading
1.189
Views
0 Comments
New 150V N-channel Power MOSFET with Low On-Resistance to Improve Power Supply Efficiency
Parts

New 150V N-channel Power MOSFET with Low On-Resistance to Improve Power Supply Efficiency

Toshiba has launched a 150V N-channel power MOSFET “TPH9R00CQH” that uses the latest generation process, “U-MOSX-H,” and that is suitable for use in switching power supplies for industrial equipment - including those deployed in data centers and communications base stations....

Continue Reading
1.111
Views
0 Comments
Battery on a motherboard – Choosing the right one
Power

Battery on a motherboard – Choosing the right one

All motherboards are equipped with a CMOS battery. In the past, it was necessary to maintain the operation of the CMOS memory, which was responsible for storing BIOS data and other parameters of a personal computer. Previously, BIOS settings were stored in CMOS memory which was powered...

Continue Reading
2.034
Views
0 Comments
PiSquare Introduction – an RP2040 & ESP-12E based board
IoTRaspberry Pi

PiSquare Introduction – an RP2040 & ESP-12E based board

Onboard-RP2040 | USB-C Type Port | Multiple HAT Connectivity | ESP8266 | 0.91 OLED | 40-Pins GPIO Connectivity | 16 Mega-Byte Flash There are several ways where you can find PiSquare very useful, as we were bound to use a single HAT on Raspberry Pi or max to max 5 Raspberry Pi HATs...

Continue Reading
1.213
Views
0 Comments
Get new posts by email:
Get new posts by email:

Join 97,426 other subscribers

Archives