TinyOLEDdemo – I²C OLED on an ATtiny10, ATtiny13A or ATtiny202
Mcu

TinyOLEDdemo – I²C OLED on an ATtiny10, ATtiny13A or ATtiny202

This is just a little demo on how to use an I²C OLED with the limited capabilities of an ATtiny10, ATtiny13A or ATtiny202 from Stefan Wagner @ github.com Connect the OLED module to the ATtiny13A as shown below. The connections for the ATtiny10 are similar. For the ATtiny202 SDA must...

Continue Reading
1.569
Views
0 Comments
e-con Systems™ launches 18 MP MIPI camera module for the NVIDIA Jetson Xavier™ NX platform
Products

e-con Systems™ launches 18 MP MIPI camera module for the NVIDIA Jetson Xavier™ NX platform

1/2.3-inch AR1820 sensor | 18 MP MIPI CSI 2 | 4 levels of zoom | NVIDIA Jetson Xavier™ NX    e-con Systems™ launches e-CAM180_CUMI1820_MOD, an 18 MP MIPI camera solution for the NVIDIA Jetson Xavier™ NX platform. e-CAM180_CUMI1820_MOD is based on the 1/2.3-inch...

Continue Reading
1.230
Views
0 Comments
Biomedical ‘lab-on-chip’ for wearable health
Sensor

Biomedical ‘lab-on-chip’ for wearable health

Wearable biomedical product developer Onera Health has introduced an ultra-low-power biosignal sensor hub for wearable health. The Onera Biomedical-Lab-on-Chip sensor system-on-chip acquires and processes multiple biosignals and is designed for a broad range of wearable health...

Continue Reading
1.177
Views
0 Comments
BLDC Motor and DC Brushed Motor Driver
Motor

BLDC Motor and DC Brushed Motor Driver

This BLDC motor driver board is equipped with a smart IFX007T half-bridge. The BLDC motor control project is capable to drive one BLDC motor. Alternatively, it can be used to drive one or two bi-directional DC motors (H-Bridge configuration, cascaded to support the second motor) or up...

Continue Reading
1.325
Views
0 Comments
Brushed DC Motor Controller Using Rotary Encoder – Arduino Compatible
MotorTop Stories

Brushed DC Motor Controller Using Rotary Encoder – Arduino Compatible

This DC Motor controller provides direction and speed control of brushed DC Motor using Rotary Encoder. This is Arduino compatible hardware that consists of LMD18201 DC motor driver chip, Atmega328 microcontroller, Rotary Encoder, L317 regulator, and other components.  Hardware offers...

Continue Reading
1.237
Views
0 Comments
Open Source PDM to USB microphone based on the Raspberry PI RP2040
USB

Open Source PDM to USB microphone based on the Raspberry PI RP2040

Maker Mahesh Venkitachalam has designed a high-quality microphone he calls Mico using the main component of the Raspberry Pi Pico – the RP2040 controller chip. He writes: Recently, I’ve been working with the Raspberry Pi Pico. I’ve been dazzled with the RP2040 - especially with...

Continue Reading
1.539
Views
0 Comments
33W charger reference design uses silicon mosfets
Power supply

33W charger reference design uses silicon mosfets

High-Efficiency ‘CO2 Smart Power’ Devices are Now Available for Volume Order Silanna Semiconductor, The Power Density Leader, has confirmed that despite the worldwide chip shortage, it has been able to ramp up production of its ‘end-to-end’ family of power conversion...

Continue Reading
1.156
Views
0 Comments
MPLAB® ICE 4 In-Circuit Emulator, Programmer and Debugger
Mcu

MPLAB® ICE 4 In-Circuit Emulator, Programmer and Debugger

Microchip Technology has announced its next-generation in-circuit emulator for its microcontrollers and microprocessor, including Atmel-created parts such as AVR and SAM. The MPLAB ICE 4 in-circuit emulator system boosts productivity with feature-rich programming and debugging for...

Continue Reading
1.274
Views
0 Comments
Get new posts by email:
Get new posts by email:

Join 97,426 other subscribers

Archives