![Sensirion SEK-SFM3119 Flow Meter Evaluation Kit Sensirion SEK-SFM3119 Flow Meter Evaluation Kit](https://www.electronics-lab.com/wp-content/uploads/2021/09/evaluation-kit-ek-f3x-cap-80dd2.png)
Sensirion SEK-SFM3119 Flow Meter Evaluation Kit
Sensirion SEK-SFM3119 Flow Meter Evaluation Kit is designed to quickly and easily evaluate the SFM3119 Low Pressure Drop Digital Flow Meter. The kit includes a flow sensor, connector cable, and downloadable SEK-ControlCenter software. The kit requires a SEK-SensorBridge (sold...
Continue Reading![Compact LX2162A SOM From SolidRun Features 16 Cortex-A72 cores and 32GB DDR4 RAM Compact LX2162A SOM From SolidRun Features 16 Cortex-A72 cores and 32GB DDR4 RAM](https://www.electronics-lab.com/wp-content/uploads/2021/09/LX2162A-SOM-720x360-1.jpg)
Compact LX2162A SOM From SolidRun Features 16 Cortex-A72 cores and 32GB DDR4 RAM
SolidRun has launched a compact 58 x 48mm LX2162A SOM that offers up to 32GB DDR4 RAM and runs Linux on NXP’s new 16nm fabricated, 23 x 23mm Layerscape LX2162A networking SoC. The new LX2162A system-on-module is said to be a quarter the size of the company’s earlier COM Express Type...
Continue Reading![Meet ESP32-C3 Board on top of a Rechargeable 16340 Battery Meet ESP32-C3 Board on top of a Rechargeable 16340 Battery](https://www.electronics-lab.com/wp-content/uploads/2021/09/LilyGO-TTGO-T-OI-Plus-720x501-1.jpg)
Meet ESP32-C3 Board on top of a Rechargeable 16340 Battery
What can be better than ESP8266 and ESP32? Maybe a battery-powered ESP32-C3 board designed to provide lower power consumption. LILYGO® has just launched an ESP32-C3 board with a rechargeable 16340 battery holder. The new board, aptly named LILYGO TTGO T-OI PLUS consumes lesser...
Continue Reading![Convert your Raspberry Pi in an Open Source tablet with the RasPad 3 Convert your Raspberry Pi in an Open Source tablet with the RasPad 3](https://www.electronics-lab.com/wp-content/uploads/2021/08/All-In-One-RasPad-3-Application.jpg)
Convert your Raspberry Pi in an Open Source tablet with the RasPad 3
Introduction Single-board computers based on the Raspberry Pi are powerful, low-cost, and compact. This makes them excellent for small tasks that require a real computer rather than a low-level microcontroller. However, they have a minor downside in that, they are compact but not...
Continue Reading![Dual +5 V/-5V @ 200 mA Regulated Linear Power Supply Dual +5 V/-5V @ 200 mA Regulated Linear Power Supply](https://www.electronics-lab.com/wp-content/uploads/2021/08/006-5.jpg)
Dual +5 V/-5V @ 200 mA Regulated Linear Power Supply
The project presented here is a dual AC to DC output linear power supply. This power supply provides low ripple low noise DC regulated output. Usually, transformer-based linear power supplies are considered very bulky and inefficient, but this power supply still is very important for...
Continue Reading![Low Voltage Microphone Preamplifier with Variable Compression and Noise Canceling Low Voltage Microphone Preamplifier with Variable Compression and Noise Canceling](https://www.electronics-lab.com/wp-content/uploads/2021/08/013-1.jpg)
Low Voltage Microphone Preamplifier with Variable Compression and Noise Canceling
This is a complete microphone signal conditioning project. Designed primarily for voice-band applications, this project provides amplification, limiting, variable compression, and noise gate. User-adjustable compression ratio, noise gate threshold, and two different fixed gains optimize...
Continue Reading![IR Remote Controlled Motorized Potentiometer – Arduino Compatible IR Remote Controlled Motorized Potentiometer – Arduino Compatible](https://www.electronics-lab.com/wp-content/uploads/2021/08/0011A.jpg)
IR Remote Controlled Motorized Potentiometer – Arduino Compatible
This is an Infrared Remote controlled motorized potentiometer controller. It’s an open-source project built on the Arduino platform and compatible with Arduino IDE for custom programming. The project consists ATMEGA328 microcontroller, IR sensor, L293D motor driver, ALPS Motorized...
Continue Reading![onsemi / Fairchild FAN53526 Programmable TinyBuck® Regulators onsemi / Fairchild FAN53526 Programmable TinyBuck® Regulators](https://www.electronics-lab.com/wp-content/uploads/2021/09/261-MKT-UC015AB-15-e1630490200470.jpg)
onsemi / Fairchild FAN53526 Programmable TinyBuck® Regulators
onsemi / Fairchild FAN53526 Digitally Programmable TinyBuck® Regulators are switching voltage regulators that provide a digitally programmable output from an input voltage supply of 2.5V to 5.5V. The FAN53526 has an output voltage programmed through an I2C interface capable of...
Continue Reading