![This RF Listener Lets You Hear The RF Sources! This RF Listener Lets You Hear The RF Sources!](https://www.electronics-lab.com/wp-content/uploads/2021/06/RF-Listener.png)
This RF Listener Lets You Hear The RF Sources!
Have you heard about RF listeners earlier? If not, Maker Wolf has designed an RF listener that lets you hear the RF sources. When we look at the RF receivers, it usually singles out a particular frequency and decodes it. But in this project, the handheld device takes a range of...
Continue Reading![Microphone Preamplifier – Sound Sensor Microphone Preamplifier – Sound Sensor](https://www.electronics-lab.com/wp-content/uploads/2021/07/002.jpg)
Microphone Preamplifier – Sound Sensor
This is an easy to construct dual-stage microphone pre-amplifier. The project can be used as a sound sensor or microphone pre-amplifier. The 1st op-amp pre-amplify the very low-level signal coming from the condenser microphone and 2nd op-amp provides more boost to the audio signal. The...
Continue Reading![Voltage-Controlled Pulse Width Modulator (PWM) – PWM Signal Generator Voltage-Controlled Pulse Width Modulator (PWM) – PWM Signal Generator](https://www.electronics-lab.com/wp-content/uploads/2021/06/001-3.jpg)
Voltage-Controlled Pulse Width Modulator (PWM) – PWM Signal Generator
This is an easy-to-use voltage to PWM converter. The project occupies very little space. The circuit is built using the versatile silicon timing device LT6992-1 chip. Pulse Width Modulation (PWM) Controlled by Simple 0V to 1V Analog Input, multiturn trimmer potentiometer provided to...
Continue Reading![Stereo Balanced to Unbalanced Audio Converter Stereo Balanced to Unbalanced Audio Converter](https://www.electronics-lab.com/wp-content/uploads/2021/07/006.jpg)
Stereo Balanced to Unbalanced Audio Converter
The primary role of this project is to convert a differential input audio signal into a single-ended output signal while rejecting noise that is common to both inputs (common-mode noise). The circuit presented here is a differential amplifier intended to receive balanced line inputs in...
Continue Reading![PrizmaCap SuperCapacitors launched PrizmaCap SuperCapacitors launched](https://www.electronics-lab.com/wp-content/uploads/2021/07/SCP-Series.jpg)
PrizmaCap SuperCapacitors launched
AVX Corporation, a leading manufacturer and supplier of advanced electronic components and interconnect, sensor, control, and antenna solutions, has launched a superlative new series of standard and custom supercapacitors engineered to provide peak performance in an array of...
Continue Reading![New R&S RTO6 oscilloscopes from Rohde & Schwarz deliver instant insights thanks to enhanced usability and performance New R&S RTO6 oscilloscopes from Rohde & Schwarz deliver instant insights thanks to enhanced usability and performance](https://www.electronics-lab.com/wp-content/uploads/2021/07/41398_50891_07_web-1024x575.jpg)
New R&S RTO6 oscilloscopes from Rohde & Schwarz deliver instant insights thanks to enhanced usability and performance
Rohde & Schwarz takes its successful R&S RTO family to the next level with the all-new and redesigned R&S RTO6 oscilloscope. Featuring an updated user interface on a larger, 15.6-inch Full HD touchscreen and straightforward workflows, it speeds up daily measurement tasks....
Continue Reading![Arduino UNO-like AB32VG1 Development Board based on RISC-V MCU Arduino UNO-like AB32VG1 Development Board based on RISC-V MCU](https://www.electronics-lab.com/wp-content/uploads/2021/06/AB32VG1-Development-Board-e1624950985670.jpg)
Arduino UNO-like AB32VG1 Development Board based on RISC-V MCU
Recently, there have been several developments in the RISC-V community with its increasing use case in various domains. We have seen this open-source technology grow at an impressive rate, catching the eye of the makers’ community to implement extraordinary projects. To help them, a...
Continue Reading![ADLINK’s CM5-P1000 Features NVIDIA Quadro P1000 GPU ADLINK’s CM5-P1000 Features NVIDIA Quadro P1000 GPU](https://www.electronics-lab.com/wp-content/uploads/2021/06/ADLINK-Technology-CM5-P1000.jpg)
ADLINK’s CM5-P1000 Features NVIDIA Quadro P1000 GPU
We saw ADLINK releasing the industry’s first embedded MXM graphic modules based on NVIDIA’s Turing architecture, to accelerate edge AI inference in SWaP-constrained applications. Now, ADLINK Technology has come up with CM5-P1000, the world’s first COTS PC/104 module to feature...
Continue Reading