The TPSM8282x device family consists of a 1-A, 2-A, and 3-A step-down converter MicroSiP™ power modules optimized for small solution size and high efficiency. The power modules integrate a synchronous step-down converter and an inductor to simplify design, reduce external...

The IoT modules enable wireless connectivity to sensors, devices, and systems communicating at high data rates or over a long distance and run a fully compatible Bluetooth Low Energy 5.0 stack built on Semtech's SX1280chipsets. Avnet Silica, an Avnet company, today announced the...

SAF Tehnika has expanded its Spectrum Compact family of ultra-portable handheld microwave spectrum analyzers with the introduction of a model that supports 6 GHz – 20 GHz. Providing best-in-class price/performance, the new Spectrum Compact delivers high durability at an affordable...

e-con Systems Inc., a leading embedded camera solutions provider launches a 16MP autofocus USB 3.0 color camera, See3CAM_160 based on the SONY IMX298 image sensor with an inbuilt Image Signal Processor (ISP). See3CAM_160 is a compact single-board camera solution that houses the...

Stackpole Electronics' chip resistors feature wide terminations for efficient current handling Stackpole’s CSSK is a metal-alloy chip resistor designed to minimize the effects of lead resistance in current-sensing applications. The CSSK features terminations on the long dimension of...

Crowd Supply ITACA Innovation uChip Microcontroller Board is an Arduino Zero-compatible, narrow DIP-sized USB board. Based on the Microchip Technology SAM D21 Arm® Cortex®-M0+ Microcontroller, the uChip integrates 500mA boost and 1A buck converters and 14 I/O pins, two of which can...

A dosimeter is an extensively used device for measuring ionizing radiation. Modern electronic personal dosimeters can be worn by a person to monitor the dose of radiation received. These modern dosimeters can give a continuous readout of cumulative dose and current dose rate and can...

This demonstration circuit is an active rectifier with reverse protection for batteries in automotive applications. The project is designed for 5A load current. Two clamping diodes, D1 and D2, are used on the board to protect the IC from overvoltage spikes at the input. The input supply...