Low-cost i.MX 8M Mini SBC with Advanced Video and Graphics Capabilities
MYIR has released a highly-integrated NXP i.MX 8M Mini based single board computer MYS-8MMX, which is capable of running Linux operating system based on Yocto 3.0 or Ubuntu 18.04. Measuring only 95mm by 69mm, the tiny board takes full features of the quad-core ARM Cortex-A53 plus...
Continue ReadingAdvantech receives early access to next release of Windows 10 Enterprise
Advantech, a leading IoT solutions provider and Microsoft EEAP (Ecosystem Engineering Access Program) partner, has received early access to next test release of Windows 10 Enterprise. Microsoft is continuing to push Windows 10 IoT Enterprise forward at a rapid pace, with substantial...
Continue ReadingHow to prevent mistakes that delay your PCB assembly (and could cost you)
Many designers can’t get their board fast enough after sending their PCB design files to their PCB assembly vendors. But the surprising thing is some customers do not provide sufficient and necessary information to their contract manufacturers (CM) – causing problems, delays,...
Continue ReadingJoy-IT PSG9080 DDS Function Generator – Programmable Signal generator
The programmable Signalgenerator PSG9080 can output many different waveforms like f. i. sine, square, triangle, pulse wave, and arbitrary waveforms. It has a generous frequency range from 1nHz to 80 MHz and a sampling rate of 33 MSa/s. The housing is made high-quality workmanship and...
Continue ReadingHigh-contrast CoG OLED display from Raystar Optronics at Rutronik
Ideal for wearables: With the REX128128B, Raystar Optronics offers a 128×128-pixel CoG Circular OLED display as an interesting alternative to TFT or LCD, among others. The round 1.18“ POLED is particularly thin at 2.05 mm and impresses with excellent viewing angle properties and a...
Continue Reading3 Phase Isolated Hall-effect Current Sense Amplifier with +/-600V Working Voltage and +/-46A Measurement Range
The project described here is a 3-Phase isolated Hall-effect current sense amplifier with +/-600-V working voltage range. The current sensor senses magnetic flux generated from current passing through the lead frame at common-mode voltages 0 to 600V DC and provides proportional output...
Continue ReadingMultiphase Oscillator with 40% Spread Spectrum Frequency Modulation and 250Khz Output Frequency
This is a precision, low power, and easy-to-use oscillator that provides multiphase outputs. The output frequency of the project is set to 250Khz, with 40% spread spectrum. The oscillator frequency can be set by resistor R1, and the spread spectrum can be changed using R3. The master...
Continue ReadingChroma 63000 – Benchtop DC Electronic Load
The 63000 series programmable DC electronic loads are reliable, precision instruments primarily designed to test switching power supplies, A/D power supplies, power electronic components, adapters, 3C batteries and chargers. Its maximum 350W rated power makes it suitable for testing...
Continue Reading