MP17xA Non-Isolated Offline Regulators
MPS' MP17xA series non-isolated offline regulators feature an integrated 700 V MOSFET and offer up to 280 mA output current with improved EMI performance Monolithic Power Systems’ MP17xA series are primary-side regulators that provide accurate constant voltage (CV) regulation...
Continue ReadingMPS’ MP8770C is a 3 V to 17 V, 8 A, synchronous step-down converter with forced CCM
MPS' MP8770C is a 3 V to 17 V, 8 A, synchronous step-down converter with forced CCM The MP8770C from Monolithic Power Systems is a fully integrated, high-frequency, synchronous rectified step-down switch-mode converter with internal power MOSFETs. The device offers a very compact...
Continue ReadingPico-EZmate Plus 1 mm-Pitch Connectors
Molex's connectors are ideal for automated assembly processes in tight-spaced applications With a current rating of up to 2.8 A and an improved withdrawal force, Molex's compact Pico-EZmate Plus 1 mm-pitch connector deliver high performance in a low-profile height, making them ideal...
Continue ReadingMarktech Optoelectronics High Power SMD UV Emitters
Marktech Optoelectronics High Power SMD UV Emitters offer a peak emission wavelength range of 275nm to 385nm. The Marktech High power UV LEDs are designed for high current and high power output operations. The devices combine state-of-the-art SMD design and low thermal resistant...
Continue ReadingParker Expands Thermal Interface Materials Offering
The Chomerics division of Parker Hannifin Corporation, the global leader in motion and control technologies, announced the launch of THERM-A-GAP GEL 75, a 7.5 W/m-K single component dispensable thermal interface material designed for high-performance applications. THERM-A-GAP GEL 75...
Continue ReadingSparkFun Thing Plus nRF9160 Development Board Gets Cellular Connectivity
We have yet another Feather form factor board that is released by SparkFun in association with CircuitDojo, which is powered by the famous Nordic nRF9160 microcontroller, SparkFun Thing Plus- nRF9160, designed for users working in smart cities and smart agriculture applications. Last...
Continue ReadingAeotec’s Z-Pi 7 Z-Wave gateway module for your Raspberry Pi
If you have been using home automation devices to control, monitor, and status reading, they may employ the Z-Wave communication protocol. There have seen several SBCs that support the interface of the Z-Wave protocol, like the RK3568 development board. It is widely known for its...
Continue ReadingCosmicWatch muon detector – Building a Cosmic Ray Detector
CosmicWatch is a project from MIT in the US and Poland’s National Center for Nuclear Research, that enables anyone with basic electronic skills to build a low-cost desktop detector for the muon particles which are created when cosmic rays collide with the earth’s atmosphere. In...
Continue Reading