Current Meter Using 0.96″ OLED Display
ArduinoTest/Measurements

Current Meter Using 0.96″ OLED Display

This project provides an economical and precise solution for DC current sensing and display on an OLED display. This board uses the ACS715T-20A hall effect-based linear current sensor chip, 0.96 Inch I2C OLED Display and Atmega328 microcontroller chip. It is an Arduino compatible...

Continue Reading
2.463
Views
0 Comments
Attiny85 8-pin Arduino Programing Shield
Arduino

Attiny85 8-pin Arduino Programing Shield

This Arduino shield transforms your Arduino UNO into an ISP-Programmer for the ATtiny85 microcontroller. The board simplifies the Boot-loader burning on the ATtiny85 chip. It consists of an 8-pin DIP socket to insert the new ATtiny85 chip, C1 decoupling capacitor, and C2 capacitor is...

Continue Reading
2.727
Views
0 Comments
Designing with an inverted-F 2.4 GHz PCB antenna
RF

Designing with an inverted-F 2.4 GHz PCB antenna

PCB design guide for an inverted-F 2.4 GHz antenna from Silicon Labs. One of the main reasons to use a PCB antenna is to reduce cost. Since the antennas are printed directly on the board, they are generally considered to be free. On boards with room to spare, this will be true. On...

Continue Reading
3.056
Views
0 Comments
Maxim Integrated MAX20077/MAX25277 Mini Buck Converters
IC

Maxim Integrated MAX20077/MAX25277 Mini Buck Converters

Maxim Integrated MAX20077/MAX25277 36V, 2.5A Mini Buck Converters offer integrated high-side and low-side switches and is designed to deliver up to 2.5A (2.0A for the MAX20077ATCC/VY+) with 3.5V to 36V input voltages while using only 3.5µA quiescent current at no load. The...

Continue Reading
1.874
Views
0 Comments
GPS/GNSS eRideOPUS 7 Modules
GPS

GPS/GNSS eRideOPUS 7 Modules

Kaga Electronics USA offers FURUNO Electrics GPS/GNSS timing and synchronization solutions Kaga Electronics USA, offers FURUNO Electrics GPS/GNSS timing and synchronization solutions that utilize GPS/GNSS timing receivers to synchronize with the grand master clock (GMC) to reduce...

Continue Reading
1.957
Views
0 Comments
Vishay VCNL4035X01 fully integrated proximity and ambient light sensor
Sensor

Vishay VCNL4035X01 fully integrated proximity and ambient light sensor

Vishay introduces a new fully integrated Automotive Grade proximity and ambient light sensor for gesture recognition Vishay introduces a new fully integrated Automotive Grade proximity and ambient light sensor for gesture recognition. Featuring Filtron™ technology, the Vishay...

Continue Reading
2.122
Views
0 Comments
MorphESP 240 ESP32-S2 board integrates a 1.3-inch color display (Crowdfunding)
Arduino

MorphESP 240 ESP32-S2 board integrates a 1.3-inch color display (Crowdfunding)

We have seen a lot of variations of the ESP32 throughout its life cycle. At Morpheans, the lack of boards for the ESP32-S2 triggered them into making their own take on the board. Then, the MorphESP 240 was born! An ESP32-S2 based board with a high-resolution IPS, colorful display built...

Continue Reading
2.376
Views
0 Comments
uChip VGA 2.0 is an Open hardware DIY retro-gaming console
DIY

uChip VGA 2.0 is an Open hardware DIY retro-gaming console

Itaca Innovation has launched a campaign on Crowdsupply for a DIY open hardware retro-gaming console called uSVC. The uSVC is a simple, DIY game console that enables you to create and play retro-style 8-bit games with standard USB controllers and keyboards. It comes as a kit, so you...

Continue Reading
3.129
Views
0 Comments
Get new posts by email:
Get new posts by email:

Join 97,426 other subscribers

Archives