KEMET's analog gas sensors feature a fast and stable response over a wide operating frequency range KEMET’s QGC thin film pyroelectric gas sensors can be reduced in physical size and still provide high sensitivity with fast frequency operation, enabling this highly stable one to...

Microchip’s PolarFire SoC FPGA Icicle Kit is an evaluation platform for the company’s mid-range PolarFire SoC FPGA family, a portfolio of RISC-V-based devices that contain secure hardware features, are capable of running off-the-shelf Linux and/or real-time operating systems (RTOS),...

The ST732 is 300 mA LDO regulator, designed to be used in several medium voltage applications. Ultra-low quiescent current of 5 µA makes it suitable for applications permanently connected to power supply/battery. This feature is also useful when electronic modules remain permanently...

Omron's ToF sensor offers real-time 3D sensing of distance to humans or objects Omron EMC's B5L ToF (Time of Flight) sensor uses the flight time of light to measure distances to objects. The B5L ToF sensor is able to turn captured images into 3D images and can measure at a speed of...

Quectel RG500Q is a series of 5G Sub-6 GHz LGA modules optimized specially for IoT and M2M applications. Adopting the 3GPP Rel-15 technology, it delivers maximum data rates up to 2.5 Gbps downlink and 900 Mbps uplink. It supports both 5G NSA and SA modes, Option 3x, 3a and Option 2...

Have you been on the lookout for a deeply embedded board capable of rendering good quality HMI interfaces with the capabilities you normally find on microcontrollers? You may want to take a look at the new STM32H7 series of MCU's, as they are the industry's first ARM Cortex-M7 core with...

An Affordable, Open Hardware Storage device, Powered by ESP32 called Maypole has been announced on Crowdsupply. The Maypole is like a USB flash memory stick. At its core is the ESP32, which enables you to transfer files— over a 2.4 GHz Wi-Fi connection—to and from an onboard MicroSD...

The circuit presented here is a very simple and easy to build Lab Power Supply. The output of this power supply is adjustable from 0 to 10V DC, and it has current limit control up to 3A. Two Trimmer potentiometers are provided to adjust the voltage and current. The input supply is DC...