![Driving multiple loads with 32 kHz Nano-Power MEMS oscillators Driving multiple loads with 32 kHz Nano-Power MEMS oscillators](https://www.electronics-lab.com/wp-content/uploads/2020/04/SiT-15xx-1024x650.png)
Driving multiple loads with 32 kHz Nano-Power MEMS oscillators
Driving multiple loads from a single oscillator output discussed in this app note from SiTime. Optimizing board space and managing power consumption of wearable devices is critical in sustaining competitiveness within this fast growing consumer segment. With less power consumed,...
Continue Reading![Ricoh Electronic Devices Company launches the RIOT-001 Environment Sensing Board Ricoh Electronic Devices Company launches the RIOT-001 Environment Sensing Board](https://www.electronics-lab.com/wp-content/uploads/2020/04/178709666.png)
Ricoh Electronic Devices Company launches the RIOT-001 Environment Sensing Board
Ricoh Electronic Devices Company RIOT-001 Environment Sensing Board is designed to transmit data obtained from a temperature/humidity/pressure sensor (BME280) and an ambient light sensor (MAX44009) via Bluetooth, to tablets or other smart devices. The board also includes a voltage...
Continue Reading![1.09″ 64×128 Monochrome Graphic OLED Display Module – SPI 1.09″ 64×128 Monochrome Graphic OLED Display Module – SPI](https://www.electronics-lab.com/wp-content/uploads/2020/04/DM-OLED11-662-side_grande.jpg)
1.09″ 64×128 Monochrome Graphic OLED Display Module – SPI
This is a tiny 1.09" 64x128 Monochrome Graphic OLED Display Module with SPI interface, sold for 9.99 USD. Specifications: 1.09" 64 X 128 Pixel Interface: 4-Wire Serial SPI Drive IC: CH1115 (Compatible SSD1306) Display Colors:White Graphic OLED Drive...
Continue Reading![Banana Pi BPI-F2P is for low power IoT Banana Pi BPI-F2P is for low power IoT](https://www.electronics-lab.com/wp-content/uploads/2020/04/750x527xBanana_PI_BPI-F2P_3.JPG.pagespeed.ic_.l_Cbl7m6m_.webp_.jpg)
Banana Pi BPI-F2P is for low power IoT
Banana Pi BPI-F2P uses Sunplus chip design, this is an industrial control board. use Plus1(sp7021) design same as Banana Pi BPI-F2S, it support PoE function with PoE module,and support RS232 and RS485 . so you can use it do an Industrial control gateway. About SunPlus SP7021 SunPlus...
Continue Reading![BalBot: a Self-Balancing Robot BalBot: a Self-Balancing Robot](https://www.electronics-lab.com/wp-content/uploads/2020/04/BalBot-a-Self-Balancing-Robot-Elektor-Magazine-631x1024.png)
BalBot: a Self-Balancing Robot
In contrast to technology and science, in everyday life, a distinction is rarely made between regulation and control. A mere control system does not monitor the output value, meaning that it can change due to external disturbances. A simple and typical example is the speed control of a...
Continue Reading![Flex Power Modules extends 2W DC/DC converter solutions for industrial use Flex Power Modules extends 2W DC/DC converter solutions for industrial use](https://www.electronics-lab.com/wp-content/uploads/2020/04/FLEX034-image-768x512-1.jpg)
Flex Power Modules extends 2W DC/DC converter solutions for industrial use
Flex Power Modules has added to its range of miniature isolated DC/DC converters intended for industrial applications with the introduction of the PUB-2M series. Delivering an output power of up to 2W with no minimum load required, the high performance product is available in single or...
Continue Reading![12V SLA Lead Acid Battery Charger Using BQ24450 12V SLA Lead Acid Battery Charger Using BQ24450](https://www.electronics-lab.com/wp-content/uploads/2020/04/photo-1024x703-1.jpg)
12V SLA Lead Acid Battery Charger Using BQ24450
This project has been developed to charge SLA (Lead Acid Batteries). It helps to charge 12V Lead-acid battery up to 12Ah in capacity. The specific current output is possible by altering the current sense resistor. The BQ24450 chip contains all the necessary circuitry to optimally...
Continue Reading![Already Compact Arduino Nano Scaled-Down Into a Breadboard Friendly Chip Already Compact Arduino Nano Scaled-Down Into a Breadboard Friendly Chip](https://www.electronics-lab.com/wp-content/uploads/2020/04/Dily3217-Scales-Down-an-Arduino-Nano-Into-a-Breadboard-Friendly-Chip-Hackster.io_.png)
Already Compact Arduino Nano Scaled-Down Into a Breadboard Friendly Chip
The new Dily3217 is a breadboard friendly Arduino compatible development board that is easy to integrate with more or less the same functionality as the Nano. Powered by a very small Atmel AVR chip, the Dily3217 copies virtually all the features of the already compact Arduino Nano into...
Continue Reading