![Open Source CAN Bridge Open Source CAN Bridge](https://www.electronics-lab.com/wp-content/uploads/2020/04/can-1024x682.jpeg)
Open Source CAN Bridge
The recent release from Emile Nijssen might just prove to be one very useful tool in the hands of those investigating in automotive systems as the board is said to allow for MITM message modification on up to three Controller Area Network buses. According to the author of the...
Continue Reading![GENE-WHU6: Compact Board Built for Full-Sized Applications GENE-WHU6: Compact Board Built for Full-Sized Applications](https://www.electronics-lab.com/wp-content/uploads/2020/04/GENE-WHU6_3D_600x400.jpg)
GENE-WHU6: Compact Board Built for Full-Sized Applications
3.5" SubCompact Board with 8th Generation Intel® Core™ i7/i5/i3/Celeron® Processor SoC AAEON, an industry leader in compact embedded solutions, introduces the GENE-WHU6 subcompact board, powered by 8th Generation Intel® Core™ processors. Despite its compact size, the...
Continue Reading![Set Up a Work-From-Home 3D Printing Studio Set Up a Work-From-Home 3D Printing Studio](https://www.electronics-lab.com/wp-content/uploads/2020/04/methodx-partner-email-1024x706.jpg)
Set Up a Work-From-Home 3D Printing Studio
With companies impacted by the global health crisis, many are working from home - we are too. MakerBot has received several questions about how to set up a 3D printing studio at home. MakerBot’s own industrial designer - Felipe Casteñeda - will walk through the steps he goes through...
Continue Reading![L6983 – 38V 3A synchronous step-down converter with 17uA quiescent current L6983 – 38V 3A synchronous step-down converter with 17uA quiescent current](https://www.electronics-lab.com/wp-content/uploads/2020/04/stmicroelectronics-l6983.jpg)
L6983 – 38V 3A synchronous step-down converter with 17uA quiescent current
The L6983 is an easy to use synchronous monolithic step-down regulator capable of delivering up to 3 A DC to the load. The wide input voltage range makes the device suitable for a broad range of applications. The L6983 is based on a peak current mode architecture and is packaged in a...
Continue Reading![Economical SSA3075X-R 7.5GHz Real-Time Spectrum Analyzer Economical SSA3075X-R 7.5GHz Real-Time Spectrum Analyzer](https://www.electronics-lab.com/wp-content/uploads/2020/04/ssa3000x-r.jpg-1024x694.png)
Economical SSA3075X-R 7.5GHz Real-Time Spectrum Analyzer
The SSA3075X-R extends the Siglent SSA3000X series to add real-time spectrum analysis capabilities for intermittent and frequency-hopping signals used in commercial communications and 5G applications. Saelig Company, Inc. has introduced the SIGLENT SSA3000X-R Real-Time Spectrum...
Continue Reading![A New Dual Channel Temperature Sensor With Resistor Programmable Temperature Switches A New Dual Channel Temperature Sensor With Resistor Programmable Temperature Switches](https://www.electronics-lab.com/wp-content/uploads/2020/04/TMP390-Q1.jpg)
A New Dual Channel Temperature Sensor With Resistor Programmable Temperature Switches
Texas Instruments has announced a new IC that is a part of family of ultra-low power, dual channel, resistor programmable temperature switches that enable protection and detection of system thermal events from –40 °C to 125 °C. The TMP390-Q1 offers independent overtemperature...
Continue Reading![EMB-2237-AI – Pico-ITX POE Edge AI Embedded Board with NXP i.MX8M Mini ARM Processor EMB-2237-AI – Pico-ITX POE Edge AI Embedded Board with NXP i.MX8M Mini ARM Processor](https://www.electronics-lab.com/wp-content/uploads/2020/04/estone_emb2237ai.jpg)
EMB-2237-AI – Pico-ITX POE Edge AI Embedded Board with NXP i.MX8M Mini ARM Processor
Built for Edge AI Applications Targeted to satisfy diverse applications demanding a robust and compact computing POE edge AI embedded board for industrial machine learning, embedded vision and inferencing, the board is based on NXP application processors with 10+ year longevity...
Continue Reading![Import any electronic design files to any MCAD Import any electronic design files to any MCAD](https://www.electronics-lab.com/wp-content/uploads/2020/04/Step-eDrawingsU.png-PNG-Image-1620-×-596-pixels-.png)
Import any electronic design files to any MCAD
If you need to import an electronic design from production files (Gerbers, drills, ipc-356 test point netlist) to any MCAD, you can use ZofzPCB.com’s new feature: STEP file export. ZofzPCB loads Gerber files automatically, converts the board outline drawing into the bare PCB solid...
Continue Reading