SYZYGY Brain-1 is an open source, modular ARM + FPGA development platform featuring the new SYZYGY standard for high-performance peripherals. This new development board bridges the gap between Pmods and FMCs allowing high performance peripherals to be used with ease. The author claims...

The Universal Op-Amp Development board is a general purpose blank circuit board that simplify prototyping circuits for a variety of Op-Amp circuits. The evaluation module board design allows many different circuits to be constructed easily and quickly. This board supports single SOT23-5...

Arduino Nano to PIC40/28 PIN development shield is an extension for Arduino Nano. This project is useful to create many projects using PIC40/28PIN shield published on electronics-lab.com, refer to schematic and connection diagram to use this shield. Two on board regulators are provided...

The project published here is a distance measuring sensor shield for Arduino Nano including power driver BJT transistor to drive a load like solenoid, motor or LED. This project can be used as Arduino shield or as stand-alone sensor. GP2Y0D810Z0F from Sharp is heart of the project, The...

Today we will take a look at using a rotary encoder with Arduino and displaying rotation data on the Nokia 5110 LCD display. A rotary encoder is an Electro-mechanical device that converts angular position or the rotation of a shaft into analog or digital values. By turning the shaft to...

xaVNA is a simple and cheap vector network analyzer that allows you to easily tune up antennas, filters, and amplifiers by plugin it to USB. It is able to display smith charts/graphs on the including PC software. The main board connects to a PC through usb and communicates via a...

Boris Landoni @ open-electronics.org designed COLIBRI, a board able to drive 4 color LEDs. He writes: Recently some multicoloured power LEDs have appeared on the market and, differently from the more common RGB LEDs, they incorporate a white LED, as an addition: they are named RGBW...

This article is the first of a series detailing the design and build process of an Arduino controlled Dual Mono AK4490 DAC by DimDim: The design goal was to do a dual mono design so as to maximize SNR and channel separation. A 4-layer PCB design was chosen so as to have a very solid,...