10 or 12-bit DAC from the ATtiny85
Mcu

10 or 12-bit DAC from the ATtiny85

David Johnson-Davies @ technoblogy.com writes: This article describes how to get up to two 10 or 12-bit digital-to-analogue outputs from an 8-bit Timer/Counter, such as in the ATtiny85. To test the routine I built a circuit which allows you to vary the brightness of two LEDs with two...

Continue Reading
5.776
Views
0 Comments
Arduino analogue thermometer
Arduino

Arduino analogue thermometer

Clinton Matos @ htxt.co.za writes: With so many projects being made with the Arduino, we’ve seen a fair share of thermometer projects that try to do something different. This version, by educ8s.tv, does so by adopting an older look. Arduino analogue thermometer -...

Continue Reading
4.013
Views
0 Comments
NanoPi NEO kit lets you build your own network-attached storage system for about $30
Raspberry Pi

NanoPi NEO kit lets you build your own network-attached storage system for about $30

Brad Linder@ liliputing.com writes: The NanoPi Neo is a tiny computer with a quad-core ARM Cortex-A7 processor, Ethernet and USB ports, and support for a number of accessories. Measuring just 1.6″ x 1.6″ it’s smaller than most Raspberry Pi computers, and with a starting...

Continue Reading
7.562
Views
0 Comments
MAX17055 – a 7μA operating current fuel gauge
IC

MAX17055 – a 7μA operating current fuel gauge

by Graham Prophet @ eedesignnewseurope.com Maxim Integrated has posted details of a battery charge monitor IC for which it claims the lowest quiescent current available, at 7µA. The 1-cell Fuel Gauge with Maxim’s ModelGauge m5 EZ algorithm can eliminate battery characterization...

Continue Reading
5.697
Views
0 Comments
3D Gaming With Raspberry Pi & ExaGear
HardwareRaspberry Pi

3D Gaming With Raspberry Pi & ExaGear

ExaGear is a virtual machine that implements virtual x86 Linux container on ARM and allows you to run Intel x86 applications directly on ARM. With this software by Eltechs you can run Intel x86 application on your ARM-based Mini PC simultaneously with common native applications.  It...

Continue Reading
8.866
Views
0 Comments
One wire controls LCD module
LCD/OLED/ePaper

One wire controls LCD module

Rex Niven @  edn.com has a design idea on how to drive a character LCD using only one wire. This hardware interface Design Idea reduces the connection to just one wire, allowing a basic microcontroller with limited I/O to drive a large display, either directly, through a standard...

Continue Reading
4.131
Views
0 Comments
3-axis accelerometer performs wake-up in consumer designs
IC

3-axis accelerometer performs wake-up in consumer designs

Kionix (Ithaca, New York), part of the Rohm Group, has added the KXTJ3 3-axis low-cost accelerometer that offers the performance of a more expensive accelerometer in a 2 x 2 x 0.9 mm form factor. By Graham Prophet @ eedesignnewseurope.com The company presents the device as a high...

Continue Reading
3.117
Views
0 Comments
Arrow’s New FPGA-Based IoT Maker Board
HardwareIoTProducts

Arrow’s New FPGA-Based IoT Maker Board

Arrow Electronics has introduced a new FPGA IoT Maker Board designed for end-to-end application development and optimised for cost. The Arrow MAX1000 board can be installed directly into a custom application or integrated on to a completely separate board. It has been...

Continue Reading
4.833
Views
0 Comments
Get new posts by email:
Get new posts by email:

Join 97,426 other subscribers

Archives