In this video tutorial educ8s.tv show us how use the TCS230 color sensor with Arduino: Hey guys, I am Nick and welcome to educ8s.tv a channel that is all about DIY electronics projects with Arduino, Raspberry Pi, ESP8266 and other popular boards. In this video we are going to learn...

by Clemens Valens @ elektormagazine.com: There was a time that every extra storage byte crammed into a chip was greeted with cheers and applause but today only few people will get the champagne out when an extra gigabyte or so is announced. We have become so used to the ever growing...

Anthony Smith has designed a simple load switch using two transistors and some resistors. The simple current-limiting load switch shown in Figure 1 will be familiar to most readers. In this circuit, a high level signal applied to the input switches on MOSFET Q2, which energizes the...

LT8630 is a 600 mA, 100V input capable synchronous step-down switching regulator using synchronous rectification to deliver efficiency as high as 93% while Burst Mode operation keeps quiescent current under 7 µA in no-load standby conditions. by By Graham Prophet @...

José M Blanes and Ausiàs Garrigós writes: Electronics engineers often use photovoltaic-module simulators to test dc/dc-power converters, inverters, or MPPT (maximum-power-point-tracking)-control techniques. The use of these simulators lets you work in the laboratory with...

The tiny board designed using A3979 IC from ALLEGRO which is complete micro stepping driver with built in translator. The translator is the key to the easy implementation of the A3979. It allows the simple input of one pulse on the STEP pin to drive the motor one micro step, which can...

4-Channel Relay Board is a simple and convenient way to interface 4 relays for switching application in your project. The project has large Relay which can switch current up to 20Amps. Specifications Input supply 12 VDC @ 360 mA Output four SPDT Relay Relay specification...

A new tutorial by The DIY Life is for building a home energy meter that provides information about power consumption and cost estimates for the month. Using Arduino and some other components you can build your own energy meter that measure the supply current to your home through a CT...