![Analog front-end IC linearizes sensors Analog front-end IC linearizes sensors](https://www.electronics-lab.com/wp-content/uploads/2016/09/160908edne-linear2986.jpg)
Analog front-end IC linearizes sensors
Susan Nordyk @ edn.com discuss about LTC2986 which is able to digitize and linearize a combination of temperature sensors in Celsius or Fahrenheit degrees. A 10-channel temperature-measurement IC, the LTC2986 from Linear Technology directly digitizes any combination of thermocouples,...
Continue Reading![MPPT Solar Charger Design based on PIC18F26J50 MPPT Solar Charger Design based on PIC18F26J50](https://www.electronics-lab.com/wp-content/uploads/2016/09/SolarChargerEagleTop-768x541.png)
MPPT Solar Charger Design based on PIC18F26J50
Lukas Fässler shares his Maximum Point Tracker Solar Charger Design based on PIC18F26J50: At the core of the design is a PIC18F26J50 in a 28 pin SOIC package. It’s capable of running at down to 2.15 volts and consumes extremely little power when running at lower clock speeds. And...
Continue Reading![CO2, temperature and humidity monitor CO2, temperature and humidity monitor](https://www.electronics-lab.com/wp-content/uploads/2016/09/pic-Front-panel3-600.jpg)
CO2, temperature and humidity monitor
An open source CO2 monitoring project from Roving Dynamics: The project described below uses a MH-Z16 or MH-Z19 CO2 sensor and a DHT-22 (or DHT-11 if less accuracy is required) to measure the Temperature and Humidity. It has a 4 line by 20 character LCD Display to show the current...
Continue Reading![Ultrasonic Anemometer Project Progress Ultrasonic Anemometer Project Progress](https://www.electronics-lab.com/wp-content/uploads/2016/09/20160907_StandaloneAnemometer_029-scaled-1024x682.jpg)
Ultrasonic Anemometer Project Progress
Lukas Fässler discuss about his anemometer project progress and what tests he has performed so far. In the mean time I managed to do some rudimentary testing and now feel confident to take orders. These tests concern the hardware only. What I said last time about the state of the...
Continue Reading![8 Channel Optically Isolated IO Board 8 Channel Optically Isolated IO Board](https://www.electronics-lab.com/wp-content/uploads/2016/09/8-CHANNEL-OPTICALLY-ISOLATED-IO-BOARD-C047_W.jpg)
8 Channel Optically Isolated IO Board
Opto-Isolated I/O Board offers a compact & convenient way to interface industrial type inputs/outputs to your microcontroller boards, Signal transmission between circuits of different potentials and impedances etc. Specifications 4 opto-isolated inputs & 4 opto-isolated...
Continue Reading![Ultra-low power, dual-band wireless microcontrollers from TI Ultra-low power, dual-band wireless microcontrollers from TI](https://www.electronics-lab.com/wp-content/uploads/2016/09/160915edne-ti-cc1350_2.jpg)
Ultra-low power, dual-band wireless microcontrollers from TI
Intended for tasks such as monitoring IoT networks from a handheld device, Texas Instruments' latest series of microcontrollers are single-chip Sub-1 GHz plus Bluetooth low energy ICs. By Graham Prophet @ www.edn-europe.com As part of TI’s pin-to-pin and software...
Continue Reading![Infinite Noise True Random Number Generator Infinite Noise True Random Number Generator](https://www.electronics-lab.com/wp-content/uploads/2016/09/INM_V1-scaled-1024x894.jpg)
Infinite Noise True Random Number Generator
waywardgeek @ github.com shares his USB TRNG: The Infinite Noise TRNG is a USB key hardware true random number generator. It uses what I call a "Modular Entropy Multiplier" architecture (previously Infinite Noise Multiplier or FireBug). Besides being simple, low-cost, and fast, it is...
Continue Reading![A20 Plus – WIFI/GPRS/GSM/CAMERA module A20 Plus – WIFI/GPRS/GSM/CAMERA module](https://www.electronics-lab.com/wp-content/uploads/2016/09/cd322635060704491.png)
A20 Plus – WIFI/GPRS/GSM/CAMERA module
Raymond Tunning shares the information he found about the new A20 modules bought from taobao. A20 Plus - WIFI/GPRS/GSM/CAMERA module -...
Continue Reading