EspoTek Labrador – Oscilloscope, Signal generator, Power supply in one tiny board
Test/Measurements

EspoTek Labrador – Oscilloscope, Signal generator, Power supply in one tiny board

EspoTek Labrador is a small, portable, USB-connected electronics lab-on-a-board that includes an oscilloscope, waveform generator, power supply, logic analyzer, and multimeter. The EspoTek Labrador plugs directly into a solderless breadboard and connects to any Windows, Mac, or Linux...

Continue Reading
7.573
Views
0 Comments
BeagleCore: an embedded industrial/IoT computing module, in distribution
IoT

BeagleCore: an embedded industrial/IoT computing module, in distribution

Distributor Conrad Business Services has added an open-source module and starter kit based on the BeagleBone Black, as a rapid development tool. By Graham Prophet @ edn-europe.com: The result of an agreement between Conrad (Hirschau, Germany) and BeagleCore, the BCM1...

Continue Reading
4.095
Views
0 Comments
ICS501 simple frequency multiplier
Miscellaneous

ICS501 simple frequency multiplier

Scott from SWHarden has published a new build: Today I made a high frequency multiplier using a single component: the ICS501 PLL clock multiplier IC. This chip provides 2x, 5x, 8x (and more) clock multiplication using an internal phased-lock loop (PLL). At less than a dollar on eBay,...

Continue Reading
5.618
Views
0 Comments
CircuitsCloud – Draw – Simulate – Share circuits online
Websites

CircuitsCloud – Draw – Simulate – Share circuits online

Free web-based online circuit simulator, Sketch, simulate, and share your circuits, entirely in your browser. Registration is needed. CircuitsCloud - Draw - Simulate - Share circuits online -...

Continue Reading
7.027
Views
0 Comments
Portable temperature, humidity and ambient light datalogger
Mcu

Portable temperature, humidity and ambient light datalogger

Jesus @ jechavarria.com pointed us to his latest project, a portable temp, humidity and ambient light datalogger. Hi all! I’m continuing here with the last board I design and now I’m continuing testing. It’s a battery-powered small datalogger based on a PIC18F2620...

Continue Reading
3.909
Views
0 Comments
Single-chip end-to-end security for IoT devices connected to the Amazon cloud
IC

Single-chip end-to-end security for IoT devices connected to the Amazon cloud

Max Maxfield @ embedded.com discuss about IoT security and single chip solutions to this issue. The Internet of Things (IoT) has the potential to change the world, but only if it's secure. Securing the IoT is currently one of the greatest challenges for the creators of IoT devices...

Continue Reading
4.080
Views
0 Comments
openSip+Puff for people with limited mobility
Mcu

openSip+Puff for people with limited mobility

Low-cost, open-source "sip-and-puff" interface to enable new methods of expression for people with and without limited mobility. by Jason Webb: Commercial sip and puff devices have been available for quite some time but are generally prohibitively expensive, highly specialized,...

Continue Reading
3.130
Views
0 Comments
SunDuino – Run your C application using solar power
Mcu

SunDuino – Run your C application using solar power

SunDuino is a Single Board Computer with integrated Battery Charger, Voltage Regulators, I2C, Digital and Analog IO. It's main benefit is that it can run a compiled C app for years on a small battery or forever using built in solar charger. A background RTOS provides SLEEP...

Continue Reading
5.404
Views
3 Comments
Get new posts by email:
Get new posts by email:

Join 97,426 other subscribers

Archives