Simple crystal tester
Test/Measurements

Simple crystal tester

Dilshan Jayakody build a simple crystal tester based on Colpitts oscillator. He writes: This is simple Colpitts oscillator to test commonly available passive crystals which range between 2MHz to 27MHz. This unit must connect to an oscilloscope and/or frequency counter to get the...

Continue Reading
7.107
Views
0 Comments
DS1307 RTC Module
Timer

DS1307 RTC Module

The module based on DS1307, The DS1307 serial real-time clock (RTC) is a low-power, full binary-coded decimal (BCD) clock/calendar plus 56 bytes of NV SRAM. Address and data are transferred serially through an I²C, bidirectional bus. The clock/calendar provides seconds, minutes,...

Continue Reading
5.571
Views
0 Comments
Teardown & Repair of an Agilent 54845A 1.5GHz 8GS/s Infinium Oscilloscope
Youtube

Teardown & Repair of an Agilent 54845A 1.5GHz 8GS/s Infinium Oscilloscope

Teardown & Repair of an Agilent 54845A 1.5GHz 8GS/s Infinium Oscilloscope -...

Continue Reading
7.948
Views
0 Comments
Using a Current Shunt with a Panel Meter / Ammeter scale change
Test/Measurements

Using a Current Shunt with a Panel Meter / Ammeter scale change

This video gives you the basics of how to calculate and use a simple resistive current shunt with an analog panel meter to change the current that is needed for a full scale deflection. The notes page for this video can be found here. Using a Current Shunt with a Panel Meter /...

Continue Reading
5.652
Views
0 Comments
ulibSD – a library for use SD cards in SPI mode with uControllers
Software

ulibSD – a library for use SD cards in SPI mode with uControllers

electronictechnician.wordpress.com has published a library for use SD cards in SPI completely written in C. It’s a library for use SD cards in SPI mode with uControllers, entirely written in C. This library can work with SD cards and also has the possibility to emulate the behavior...

Continue Reading
3.994
Views
0 Comments
Hacking a UART on a blood pressure cuff
Interface

Hacking a UART on a blood pressure cuff

moamindustries.com hacked an Omron RS8 blood pressure cuff by adding a UART interface to it. As part of a prototype developed 12 months ago I was tasked with reading measurements from a blood pressure cuff [sphygmomanometer] in real time. Not surprisingly there are no consumer level...

Continue Reading
8.567
Views
0 Comments
WISP – Wireless Identification and Sensing Platform
Sensor

WISP – Wireless Identification and Sensing Platform

WISP, the Wireless Identification and Sensing Platform, is a family of sensors that are powered and read by UHF RFID readers. WISP, the Wireless Identification and Sensing Platform, is a family of sensors that are powered and read by UHF RFID readers. WISPs do not require batteries...

Continue Reading
5.736
Views
0 Comments
Hacking home weather station transmitter
Sensor

Hacking home weather station transmitter

Bob hacked a home weather station transmitter and made a home thermometer from it. He writes: Recently I've found this piece of electronic on the dumpster, it was looking interesting - compact case with battery holder, LCD display, temperature and humidity sensor. It has also radio...

Continue Reading
5.500
Views
0 Comments
Get new posts by email:
Get new posts by email:

Join 97,426 other subscribers

Archives