login
This is the image preview of the following page:
Bluetooth based PIR motion detecting application using STM32 board
1. Introduction In this project, we will use a PIR sensor to detect motion. Once motion is detected, it will trigger an interrupt and the BleuIO dongle connected to the board will advertise for 25 seconds. You can expand the project based on your needs further. A PIR (passive infrared) Sensor is... Read More
Image Downloads:
- full (509x274)
- thumbnail (150x150)
- medium (509x274)
- medium_large (509x274)
- large (509x274)
- 1536x1536 (509x274)
- 2048x2048 (509x274)
- re_large (509x274)
- re_xxmedium (290x230)
- re_xmedium (359x236)
- re_medium (420x274)
- re_a_xsmall (186x174)
- re_xsmall (125x96)
- crp_thumbnail (292x236)
- menu-24x24 (24x13)
- menu-36x36 (36x19)
- menu-48x48 (48x26)
- woocommerce_thumbnail (300x225)
- woocommerce_single (509x274)
- woocommerce_gallery_thumbnail (100x100)
- wp_rp_thumbnail (150x150)
- wp_rp_thumbnail_prop (150x81)
RELATED POSTS
16 April, 2019 Solid state battery is small enough for medical implants
19 October, 2018 32.768 kHz MEMS resonator is only 0.9×0.6×0.3mm
2 January, 2018 Transistors- The 70-year-old invention that changed the world
2 April, 2016 Arduino Auto Power off. Make Arduino power off itself!
21 July, 2021 MYIR Introduces Zynq UltraScale+ MPSoC based Vision Edge Computing Platform
31 July, 2024 ASRock IMB-A8000 Mini-ITX Motherboard comes with several AMD Ryzen APU options
