login
This is the image preview of the following page:
BML project for using a $2 FTDI FT260Q for adding 14 bits of GPIO to any PC via USB with no device drivers required. Ever miss the simple days of using a PC’s LPT1 parallel port to bit-bang GPIO over 8 output pins and 4 input pins of the DB-25 connector? I sure do. My first design project as a ... Read More
Image Downloads:
- full (356x187)
- thumbnail (150x150)
- medium (300x158)
- medium_large (356x187)
- large (356x187)
- 1536x1536 (356x187)
- 2048x2048 (356x187)
- re_large (356x187)
- re_xxmedium (290x187)
- re_xmedium (356x187)
- re_medium (356x187)
- re_a_xsmall (186x174)
- re_xsmall (125x96)
- crp_thumbnail (292x187)
- menu-24x24 (24x13)
- menu-36x36 (36x19)
- menu-48x48 (48x25)
- sendpress-max (356x187)
- woocommerce_thumbnail (300x187)
- woocommerce_single (356x187)
- woocommerce_gallery_thumbnail (100x100)
- wp_rp_thumbnail (150x150)
- wp_rp_thumbnail_prop (150x79)
RELATED POSTS
27 May, 2019 16×2 LCD Shield for Arduino Nano
3 September, 2019 Chemical sensor monitors sewage waste waters to expose polluters
12 March, 2019 Bootstrap Circuit in the Buck Converter explained
11 March, 2016 Teardown: Amazon Dash Button keeps you connected
11 May, 2023 MYIR Launched $14 ARM SoM based on Allwinner T113-S3 dual-core Cortex-A7 SoC
4 February, 2022 Texas Instruments TMP114 Digital Temperature Sensor
