Arduino Nano 33 BLE Sense Rev2 supports edge computing using Edge Impulse platform
ArduinoTop Stories

Arduino Nano 33 BLE Sense Rev2 supports edge computing using Edge Impulse platform

Arduino designed Nano 33 BLE Sense Rev2 board for beginners and entry-level professionals to get familiar with embedded machine learning capabilities. The Arduino Nano 33 BLE Sense Rev2 features Nordic Semiconductor’s nRF52840 microcontroller featuring an Arm Cortex-M4 32-bit...

Continue Reading
1.468
Views
0 Comments
Featuring T-Display-S3 with ESP32-S3 and 1.9 inch Color Display
ArduinoLCD/OLED/ePaper

Featuring T-Display-S3 with ESP32-S3 and 1.9 inch Color Display

T-Display-S3 is a development board that has ESP32-S3 as the main control chip. It features a color LCD screen that is 1.9 inches in size and two buttons that may be programmed. The connectivity is made possible by the use of the I8080 interface. It also maintains the same design and...

Continue Reading
1.460
Views
0 Comments
Compact ESP32-S3 SoC board with Cat-M & NB-IoT Support by LILYGO
ArduinoIoT

Compact ESP32-S3 SoC board with Cat-M & NB-IoT Support by LILYGO

A compact embedded board from LILYGO with Wi-Fi/BL5.0 and the SIM7080G module for CAT-M and NB-IoT connectivity has been launched recently. The SIM7080G is an SMT-type Multi-Band CAT-M and NB-IoT module. It is easy to add on to because it has many interfaces, such as UART, GPIO, PCM,...

Continue Reading
1.400
Views
0 Comments
Smart Wi-Fi Scale Geared Up With ESP32
Arduino

Smart Wi-Fi Scale Geared Up With ESP32

A wide range of uses is possible for low-cost kitchen scales. They are typically quite basic devices without features like wireless connectivity. Still, Liore Shai made the decision to change that by adding Wi-Fi functionality to an Amazon Basics scale which cost about just $10 shipped...

Continue Reading
1.429
Views
0 Comments
Smart plug ESP32 OpenMQTTGateway  serving as an BLE MQTT gateway and a Power meter
ArduinoIoT

Smart plug ESP32 OpenMQTTGateway serving as an BLE MQTT gateway and a Power meter

In order to function as a BLE MQ Telemetry Transport (MQTT) gateway and power meter compatible with Home Assistant, Homebridge, OpenHAB, DomoticZ, FHEM, Jeedom, NodeRed, AWS, and any MQTT-compatible IoT or Smart Home system, the Theengs Plug ESP32 smart plug runs OpenMQTTGateway...

Continue Reading
1.487
Views
0 Comments
An affordable SDI signal generator using Arduino MKR Vidor 4000
ArduinoFPGA

An affordable SDI signal generator using Arduino MKR Vidor 4000

Transmission of video from one location to another in the professional video world is typically done via SDI (Serial Digital Interface). This FPGA-powered device, intended as a test tool for SDI circuits, pushes signals at 1.485 Gbps. Based on an Arduino MKR Vidor 4000, Chris Brown of...

Continue Reading
1.317
Views
0 Comments
Translating “Dah” and “Dit” Speech Into Morse Code with an CWVox using Arduino
Arduino

Translating “Dah” and “Dit” Speech Into Morse Code with an CWVox using Arduino

image: CWvox Prototype connected to the radio (Source: Kevin Loughin) These days, it seems like every speech-detection-related project is based on some kind of advanced algorithm, such as machine learning, pattern matching, or spectrum analysis. But Kevin Loughin (AKA KB9RLW), an...

Continue Reading
1.167
Views
0 Comments
433 MHz is alive! Communicating with 433 MHz sensors using an ESP32 board and LoRa module.
ArduinoSensor

433 MHz is alive! Communicating with 433 MHz sensors using an ESP32 board and LoRa module.

While Matter, Bluetooth, Zigbee, and Zwave may get all the press these days, 433 MHz was the simple yet reliable technology that our sensors and devices relied on before they became popular. Given the wide range of applications for the 433 MHz, generalizations regarding the technology are...

Continue Reading
1.662
Views
0 Comments
Get new posts by email:
Get new posts by email:

Join 97,426 other subscribers

Archives