Category: Arduino

ThermoDuino is a mini Arduino compatible board that consists of LM35 temperature sensor, ATMEGA328 chip, and 0.96″ OLED display. The board has been designed to measure temperature. We have used the LM35 SO8 SMD sensor which is connected to A0 analog pin of the chip, and the OLED...

Enter the world of electronics with Seeed Grove sensors, actuators and Arduino all in one  Open-source hardware, software, and content platform, Arduino has collaborated with Chinese DIY electronics company, Seeed to create the all-new Arduino Sensor Kit. The kit brings the power of...

This is a 3-channel, PWM based current-adjustable LED driver designed for RGB LED control. The circuit has been designed to control high current RGB LEDs or RGB LEDs strip. Colors of the three RGB LEDs can be set using 3 potentiometers, different colors are possible by adjusting these...

This project provides an economical and precise solution for DC current sensing and display on an OLED display. This board uses the ACS715T-20A hall effect-based linear current sensor chip, 0.96 Inch I2C OLED Display and Atmega328 microcontroller chip. It is an Arduino compatible...

This Arduino shield transforms your Arduino UNO into an ISP-Programmer for the ATtiny85 microcontroller. The board simplifies the Boot-loader burning on the ATtiny85 chip. It consists of an 8-pin DIP socket to insert the new ATtiny85 chip, C1 decoupling capacitor, and C2 capacitor is...

We have seen a lot of variations of the ESP32 throughout its life cycle. At Morpheans, the lack of boards for the ESP32-S2 triggered them into making their own take on the board. Then, the MorphESP 240 was born! An ESP32-S2 based board with a high-resolution IPS, colorful display built...

Monitoring the voltage level of a 12V Lead Acid Battery (SLA) is easy and simple with this project. The board is made using an ATMEGA328 micro-controller and 12 x 5mm LEDs. The ATMEGA328 microcontroller senses the analog voltage on A3 Analog pin and drives 12 LEDs connected to digital...

Earlier this year, Seeed Studio released the small but powerful Seeeduino XIAO board which has become one of the hottest products in the Seeeduino series. The Seeeduino XIAO is a 23.5mm by 17.5mm Microchip SAM D21 board that packs a fair amount of power in its dual seven-pin...